Operation Manual

NUMBER BUTTONS

In Radio status, press the NUMBER buttons to input the number of the required

frequency or band. For more information, see RADIO OPERATION.

PLAY/PAUSE BUTTON

In play status, press the PLAY/PAUSE button to pause, press this button again to

continue the playing.

Note: This button is unavailable in Audio Input mode.

Stop button

In play status, press the STOP button, the player will stop playing; Press the

PLAY/PAUSE button to resume playing mode.

Note: This button is only available in USB mode.

REPEAT BUTTON

In play status, press the REPEAT button to repeat playing, press this button once to

repeat playing the current track, press again to repeat all tracks, press the third time

to cancel the setting.

Note: This button is only available in USB mode.

REPEAT BUTTON

In play status, press the DSP button to select different effects: off, Jazz, Dance, Pop,

Party.

USB

It is possible to listen to audio files using the USB interface of this unit.

1. Connect the USB device with this unit.

2. Press the USB button on the remote control to play the USB.

3. Press the 7 or 8button to fast rewind or fast forward; Press the 9 or : button to go

to the previous or next audio files.

4. To exit the USB mode: Press the BLUETOOTH, AUDIO or FM button, and switch

to other modes.

Note:

1) USB-Extension cable should have a max. length of 0.5m.

2) Depending on the amount of data and media speed, it may take longer for system

to read the contents of media device. In some cases, reading time may be as long as

60 seconds. This is not a malfunction.

3) Even when they are in a supported format, some files may not play depending on

the content.

BLUETOOTH

It is possible to listen to audio files using the BLUETOOTH interface of this unit.

1. Press the BLUETOOTH button to enter the bluetooth mode. The indicator light

flashes blue.

2. Start the bluetooth function on the device such as the mobile phone.

3. Place the device into Bluetooth search mode. The device will begin searching for

the speaker. Select the BTT-1 from the searched list.

4. When connecting successfully, the indicator light will be lit steadily. Then select the

track you want to play.