DF-1520 Digital photoframe OWNERS MANUAL BEDIENUNGSANLEITUNG MODE D’EMPLOI GEBRUIKSAANWIJZING MANUAL DEL USUARIO For information and support, www.lenco.
Manual Languages English Dutch French German Spanish http://www.lenco.
Table Of Contents Introduction ................................................................................................. - 1 Main Features ............................................................................................. - 1 Getting Started ............................................................................................ - 2 Package Contents ................................................................................... - 2 Installing your unit.............................
Introduction Congratulations on your purchase of 15 inch Digital Picture Frame, model DP-1520 Before operating the unit, please read this manual thoroughly, and retain it for future reference. This manual will help you use many of the exciting and useful features that will make your Digital Picture Frame viewing more enjoyable. This Digital Picture Frame lets you view digital pictures directly from your camera's memory cards.
Getting Started Package Contents Digital Picture Frame and stand User Guide AC/DC Adapter Remote USB cable For information and support; www.lenco.
Installing your unit • • • • • Open the package and remove the protective foam. Remove the protective sleeve from the unit. Install the Digital Picture Frame stand as the back of the unit. Plug in the AC adapter into power outlet. Plug the other end into the unit. After the content is stored on the target flash media; insert the media into the correct slot. Turn power to ON position via the ON/OFF switch.
Operation This Digital Frame is extremely easy to operate: 1. Remove memory card from camera: 2. Insert memory card into the frame with face away from the unit: 3. when power on the frame,the picture would displayed automatically. For information and support; www.lenco.
Controls For information and support; www.lenco.
Using your Remote Control The following table briefly describes the remote control functions Button Description On/Off Switch on/off the frame Mode Vol - Photo/Audio/Video Mode Switch Decrease volume Vol + Increase Volume Slideshow Start the slideshow OSD Display the picture menu Menu Display the main menu Rotate Rotate the current picture Enter Confirm Zoom Zoom the current picture Play/Pause Stop Arrows Navigate on screen For information and support; www.lenco.
Inserting Memory Cards The Digital Picture Frame is compatible with the following memory cards: • • • • • Secure Digital Card (SD) MultiMedia Card (MMC) Memory Stick CompactFlash (CF) Card XD Picture Cards TM TM TM TM Insert the memory card with the front label facing AWAY from you. Do not force the memory card into the memory slot. If you are not able to easily insert the memory card completely, you may have inserted it the wrong way.
Main menu Upon turning on the Digital Picture Frame, you will go straight to the MENU screen. To set the Auto Start feature Choose the SETUP screen. Use the left/right arrow to go to the “Set up”. Press the Enter button to enter the options screen. Use the Up / down arrows to choose your auto start option. Press the “MENU” button to show the following menu: For information and support; www.lenco.
Use the left and right arrows to move inside the menu and then press “Enter” to continue Note: In all menus, pressing the “Menu” button will bring you back to the main menu Function Nand Setup Calendar SD/MMC/MS/xD CF USB Description Play files in internal memory Set system menu Display calendar, clock, alarm Play files on SD/MMC/MS/xD memory card Play files on CF memory card Play files on USB flash drive NOTE: Icons of above functions shall appear automatically on MENU screen when certain memory card is
Viewing Pictures Make sure you have at least one picture on your memory card or your USB flash drive. When this is done: • • • Select the desired flash media on main menu. (SD/xD/CF/MS/USB/NAND-Internal Memory) Select the “PHOTO” option from the menu and press “ENTER” A Photo thumbnail will appear. User UP/DOWN/LEFT/RIGHT arrows can move the highlight. If the highlighted is a folder, press Enter to enter the folder. For information and support; www.lenco.
• Otherwise press Enter to enter the full screen photo (pause mode) and press Play to enter into slideshow mode. • Once a slideshow is playing or a picture is being shown, press the OSD button. The following menu will appear: Previous Play previous picture in the picture list Play or Pause Play or pause the current slideshow. Next Play next picture in the picture list Rotate Use the rotate function to change the picture orientation to either portrait or landscape.
Watching video The Digital Picture Frame supports the following video formats: • • Motion JPEG (*avi): video format used by most digital cameras MPEG-I &MPEG-2 –w/layer I,II,III(*MPG,*MPEG,*DAT) MPEG 4-W/MP3 audio (*avi) Make sure you have at least one video on your memory card or your USB flash drive. When this is done: • • • Select the desired flash media on main menu.
Previous Play previous movie in the play list Fast Forward Play forward the movie by 2/3/4 times speed. Play or Pause Play or Pause the movie. Fast Backward Play backward the movie by 2/3/4 times speed. Next Play next movie in the play list Stop Stop the movie and return to the play list Zoom Increase the size of the picture by 2/3/4/1 times. For information and support; www.lenco.
Listening to MP3 music Make sure you have at least one MP3 file on your memory card or your USB flash drive. When this is done: • • • • Select the desired flash media on main menu. (SD/xD/CF/MS/USB/NAND-Internal Memory) Select the “MUSIC” option from the menu and press “ENTER” A list of music files will be listed on the left side of the screen. The right side consists of the frequency chart and information status bar. The song information area is below the status bar.
• Press VOL+ to increase the volume or VOL- to decrease the volume. • Press the Play/Pause button on remote control to play or pause the music file. • Press the Stop button on the remote control to return to the list of music files. File Option Playing a slideshow with music Ensure you have at least one picture on your memory card or your USB flash drive. Additionally, you must have one MP3 file saved on the selected memory card/USB/Internal Memory.
Previous Play previous picture in the picture list Play or Pause Play or pause the current slideshow. Next Play next picture in the picture list Rotate Use the rotate function to change the picture orientation to either portrait or landscape. Stop Stop slideshow and return to photo thumbnail. Zoom Increase the size of the picture by 2/4/8/16/1 times. VOL Press VOL+ or VOL- on remote control to increase or decrease the volume For information and support; www.lenco.
Copying and Deleting Files To copy and delete files on your memory card, USB drive or internal memory. Copy • • • • • Select the desired flash media on main menu. (SD/xD/CF/MS/USB/NAND-Internal Memory) Select the “FILE” option from the menu and press “ENTER” A list of available files will be displayed. Use the up and down arrows to highlight your required file and press the right arrow to highlight the desired file.
• Press Enter to start copying the file. Delete • • • • Select the desired flash media on main menu. (SD/xD/CF/MS/USB/NAND-Internal Memory) Select the “FILE” option from the menu and press “ENTER” A list of available files will be displayed. Use the up and down arrows to highlight your required file and press the right arrow to highlight the desired file. Repeat for all files that you want to delete Press the “OSD” button to display the Copy and Delete menu. Select Delete function and press Enter.
Using the SETUP option The following options can be changed by using the “SETUP” option from the main menu: Function Language Slideshow time Slideshow mode Music Repeat Mode Movie Repeat Mode Display mode Time Alarm Default Description Includes English, French, Spanish,Deutsch,Swedish,Greek,Italian,Turkce.
Technical Support Frequently asked questions 1) Q: Can I use touch-enabled technology for my Digital Picture Frame? A: The LCD screen does not support touch-enabled technology. Please use the buttons or remote control to control the Digital Picture Frame. 2) Q: If I keep showing the same photo for a long time, will it damage the LCD screen? A: No. The Digital Picture Frame can display the same photo continuously for a long time.
Troubleshooting Symptom Cause Digital Picture The POWER connector to the unit Frame doesn’t power is not securely inserted. on Corrective Actions Make sure you connect the AC adapter to the frame properly. When you connect the AC adapter to the frame and power up the unit, even without a memory card, you should see a blank screen. If you don’t see the lit screen, check if the power is connected to the Digital Picture Frame and make sure it is securely attached.
Specifications Type Internal Memory Resolution Alimentation Consumption Luminosity Contrast Viewing Angle Response Time Display Mode File Format Photo Size Current Cards USB ports Package Contents 15 inch Digital Picture Frame 128 MB 1024x786 12 V 24 Watts 450cd/m2 max.
Inhouds opgave Inleiding………………………………………………………………………………………………..……………23 Voornaamste functies………………………………………………………………………………...…………..23 Start………………………………………………………………………………………………………..…………24 Inhoud van de verpakking……………………………………………………………….....….......……………24 Het toestel installeren…………………………………………………………………….................……..……24 Aansluiten op de PC……………………………………………………………………………….……………..25 Werking…………………………………………………………………………......…............…………………..25 Bediening……………………………………………………………………………......….....….
Inleiding Gefeliciteerd met de aankoop van uw 15 inch Digitaal Fotokader model DF-1520. Lees zorgvuldig de gebruiksaanwijzing alvorens het toestel in gebruik te nemen en bewaar de gebruiksaanwijzing voor later gebruik. Deze handleiding helpt u gebruik te maken van de vele boeiende mogelijkheden van uw Digitaal Fotokader. Dit Digitaal Fotokader laat u toe uw foto’s rechtstreeks van de geheugenkaart van uw fototoestel te bekijken.
Starten Inhoud van de verpakking Digitaal Fotokader en standaard Handleiding AC/DC Adapter Afstandsbediening USB kabel Het toestel installeren Open de verpakking en verwijder het beschermende piepschuim. Verwijder ook de beschermhoes rond het toestel. Bevestig de standaard achteraan het toestel. Steek de adapter in een wisselstroom stopcontact. Steek het andere einde in het toestel. Plaats de geheugenkaart met de bestanden in de juiste gleuf. For information and support; www.lenco.
Zet het toestel aan met de Aan/Uit schakelaar. Aansluiten op een PC Het Digitaal Fotokader heeft een USB poort om op een PC (USB Slave) aan te sluiten en een tweede om andere apparaten aan te sluiten zoals een Flash geheugen, een USB kaartlezer of een camera (USB Host). Wanneer het toestel aangesloten is op een PC kan u bestanden van de PC verplaaatsen naar het intern geheugen of de geheugenkaart. U kan ook bestanden uit het intern geheugen verwijderen.
Bediening For information and support; www.lenco.
Gebruik van de afstandsbediening De volgende tabel bevat een beknopte beschrijving van de afstandsbediening.
Geheugenkaarten inbrengen Het Digitaal Fotokader ondersteunt de volgende geheugenkaarten: Secure DigitalTM Card (SD) MultiMediaTM Card (MMC) Memory StickTM CompactFlashTM (CF) Card XD Picture Cards Plaats de geheugenkaart in het toestel met de bovenzijde naar beneden gericht. Oefen geen druk uit, als u de geheugenkaart niet vloeiend in het slot kunt plaatsen heeft u de kaart waarschijnlijk verkeerd ingebracht. Opmerking: Het Digitaal Fotokader herkent alleen foto’s die opgeslagen zijn in JPEG formaat.
Gebruik de Links/Rechts pijlen om een keuze te maken in het menu en druk op de Enter toets om verder te gaan. Opmerking: Als u op de Menu toets drukt, gaat u steeds terug naar het hoofmenu, ongeacht in welk menu u zich bevindt.
U ziet nu een miniatuurweergave van de foto. Met de Links/Rechts/Omhoog/Omlaag toetsen (pijlen) kunt u een foto kiezen. Als u een map gekozen heeft, druk dan op de Enter toets om die map te openen. For information and support; www.lenco.
Heeft u een foto gekozen, druk dan op de Enter toets om de volledige foto te tonen (in pauze modus) of druk op de Play toets voor de Diavoorstelling modus. Als u op de OSD knop op de afstandsbediening drukt terwijl er een diavoorstelling bezig is of er een foto getoond wordt, ziet u volgend menu: Vorige Toont de vorige foto in de lijst. Afspelen of Pauze Afspelen of pauzeren van de lopende diavoorstelling. Volgende Toont de volgende foto in de lijst. For information and support; www.lenco.
Draaien De oriëntatie van de foto wijzigen naar portret (rechtop) of landschap (liggend). Stop De diavoorstelling beëindigen en terug gaan naar de miniatuurvoorstelling. Zoom De foto vergroten: druk verschillende keren om steeds verder te vergroten. Video’s bekijken Het Digitaal Fotokader ondersteunt volgende video formaten: Motion JPEG (*avi): gebruikt door de meeste video camera’s.
Als u op de OSD knop drukt op de afstandsbediening terwijl er een filmvertoning bezig is, ziet u volgend menu: Vorige Speelt de vorige film in de lijst af. Snel vooruit Speelt de film af met een 2/3/4 keer hogere snelheid. Afspelen of Pauzeren De film afspelen of onderbreken. Snel achteruit Speelt de film achterwaarts af met een 2/3/4 keer hogere snelheid. Volgende Speelt de volgende film in de lijst af. Stop Stopt het afspelen en keert terug naar de afspeellijst. Zoom Vergroot het beeld 2/3/4/1 keer.
MP3 muziek beluisteren Zorg ervoor dat er minstens één MP3 bestand op de geheugenkaart of het USB flash geheugen staat. Kies de gewenste media in het hoofdmenu (SD/xD/CF/MS/USB/NAND-Intern Geheugen) Kies de Muziek optie in het menu en druk op de Enter toets. Op de linkerhelft van het scherm verschijnt de lijst met alle muziekbestanden. Op de rechterhelft ziet u het de frequentiebalken en de informatie over het gekozen bestand.
Druk op de VOL+ toets om het geluidsvolume te verhogen en op de VOL- toets om het te verlagen. Druk op de Play/Pause toets op de afstandsbediening om de muziek af te spelen of te onderbreken. Druk op de Stop toets op de afstandsbediening om terug te gaan naar de lijst met muziekbestanden. Bestandskeuze Een diavoorstelling afspelen met muziek. Zorg ervoor dat er minstens één fotobestand op de geheugenkaart of USB flash geheugen staat.
Vorige Toont de vorige foto in de lijst. Afspelen of Pauzeren De diavoorstelling afspelen of onderbreken.. Volgende Toont de volgende foto in de lijst. Draaien Wijzigt de oriëntatie van de foto naar portret (rechtop) of landschap (liggend). Stop De diavoorstelling beëindigen en terug gaan naar de miniatuurvoorstelling. Zoom De foto 2/4/8/16/1 keer vergroten.. VOL Druk op VOL+ of VOL- toetsen op de afstandsbediening om het geluidsvolume te verhogen of te verlagen. For information and support; www.lenco.
Bestanden kopiëren en verwijderen Bestanden op uw geheugenkaart, USB flash geheugen of intern geheugen kopiëren of verwijderen. Kopiëren Kies het gewenste geheugen in het hoofdmenu (SD/xD/CF/MS/USB/NAND-Intern Geheugen) Kies de File optie in het menu en druk op de Enter toets. U ziet nu de lijst van de beschikbare bestanden. Kies met de Omhoog/Omlaag toetsen het gewenste bestand en druk dan op de Rechts toets. Herhaal dit voor alle bestanden die u wil kopiëren.
Druk op de Enter toets om het kopiëren te starten. Verwijderen Kies het gewenste geheugen in het hoofdmenu (SD/xD/CF/MS/USB/NAND-Intern Geheugen) Kies de File optie in het menu en druk op de Enter toets. U ziet nu de lijst van de beschikbare bestanden. Kies met de Omhoog/Omlaag toetsen het gewenste bestand en druk dan op de Rechts toets. Herhaal dit voor alle bestanden die u wil verwijderen. Druk op ds OSD toets om het Kopieer en Verwijder menu te tonen.
Kalender/klok Als u het toestel aan zet gaat u meteen naar het Menu scherm. Als u Kalender/Klok kiest en op de Enter toets drukt, krijgt u het Kalender/Klok scherm. Als het alarm aangezet is ziet u meteen ook de alarmtijd. Een diavoorstelling start op de rechterhelft in het voorproef venster. For information and support; www.lenco.
Technische ondersteuning Veel gestelde vragen 1) V: Beschikt mijn Digitaal Fotokader over een aanraakscherm? A: Het LCD scherm is niet voorzien van aanraak technologie. Gebruik de toetsen op de afstandsbediening om het toestel te bedienen. 2) V: Wordt het LCD scherm beschadigd als ik lange tijd dezelfde foto toon? A: Neen. Het Digitaal Fotokader kan dezelfde foto lange tijd ononderbroken tonen. Het is nochtans aangeraden eenzelfde foto niet langer dan een maand ononderbroken te tonen.
Problemen oplossen Probleem Oorzaak U kan het Digitaal De stroomvoorziening van het Fotokader niet inschakelen toestel is niet goed aangesloten. Remedie Zorg ervoor dat de adapter goed op het toestel is aangesloten. Bij het opstarten, ook zonder geheugenkaart, moet het scherm oplichten. Als dit niet zo is, controleer dan of de stekker in het stopcontact zit en de adapter goed op het toestel aangesloten is. Geen opstartscherm Geheugenkaart niet goed geplaatst.
Specificaties Type Intern geheugen Resolutie Voeding Verbruik Helderheid Contrast Kijkhoek Reactie tijd Schermformaat Bestandsformaat Foto afmetingen Stroom Kaarten USB poorten Inhoud van de verpakking 15 inch Digitaal Fotokader 128 MB 1024x768 12 V 24 Watts 450cd/m2 max.
Sommaire Introduction ............................................................................................... - 45 Fonctionnalités principales ........................................................................ - 45 Démarrage ................................................................................................ - 46 Contenu de l’emballage ......................................................................... - 46 Installation de votre unité .........................................
Introduction Nous vous félicitons d’avoir fait l’acquisition du cadre photo numérique avec écran 15 pouces, modèle DF-1520 Avant d’utiliser l’unité, lisez attentivement ce manuel et conservez-le pour pouvoir vous y référer ultérieurement. Ce manuel vous aidera à vous familiariser avec les nombreuses fonctions excitantes et pratiques qui rendront votre visionnage de photos encore plus appréciable.
D marrage Contenu de l’emballage Cadre photo numérique et son support Manuel d’utilisation Adaptateur de courant CA/CC Remote Télécommande Cordon USB For information and support; www.lenco.
Installation de votre unité Ouvrez l’emballage et retirez la mousse de protection. Retirez la pochette en plastique recouvrant l’unité. Installez le support du cadre photo numérique à l’arrière de l’unité. Raccordez une extrémité du cordon d’alimentation CA à une prise de courant. Raccordez l’autre extrémité du cordon à l’unité. Une fois le contenu stocké sur le lecteur média Flash cible; connectez le média sur son emplacement respectif. Positionnez le commutateur d’alimentation ON/OFF sur ON.
Mode opératoire Ce cadre photo numérique est très simple d’emploi : 1. Retirez la carte mémoire de votre appareil photo : 2. Insérez la carte mémoire dans le cadre photo en dirigeant la carte dans la direction opposée : 3. Lorsque vous mettez en marche le cadre photo numérique, les images s’affichent automatiquement. For information and support; www.lenco.
For information and support; www.lenco.
Commandes For information and support; www.lenco.
Fonctionnement de la t l commande commande Le tableau suivant offre une brève présentation des fonctions de la télécommande Touche Description On/Off Mettre en marche/arrêter le cadre photo Mode Vol - Sélection du mode Photo/Audio/Vidéo Diminuer le volume Vol + Augmenter le Volume Slideshow Démarrer le diaporama OSD Afficher le menu Image Menu Afficher le menu principal Rotate Effectuer une rotation sur image Enter Confirmer Zoom Effectuer un zoom sur l’image sélectionnée Lecture/Pause Ar
Insertion de cartes m moire Le cadre photo numérique est compatible avec les cartes mémoire suivantes: Cartes Secure Digital (SD) Cartes MultiMedia (MMC) Cartes Memory Stick Cartes CompactFlash (CF) Cartes XD Image TM TM TM TM Insérez la carte mémoire en dirigeant l’étiquette avant dans l’autre direction. Ne forcez pas l’insertion de la carte mémoire dans l’emplacement carte mémoire. S’il vous est impossible d’insérer la carte mémoire complètement, cela signifie que vous avez mal orienté la carte.
Menu principal Après avoir mis en marche le cadre photo numérique, le MENU s’affiche. Pour définir la fonction Démarrage automatique, sélectionnez l’interface CONFIGURATION. Utilisez les touches directionnelles Gauche/Droite pour accéder à l’interface “Configuration”. Appuyez sur la touche Enter pour accéder aux options de l’interface. Utilisez les touches directionnelles Haut/Bas pour choisir l’option Démarrage automatique.
Fonction Nand Configuration Calendrier SD/MMC/MS/xD CF USB Description Permet de lire les fichiers de la mémoire interne Permet de définir les options du menu Système Permet d’afficher le calendrier, l’horloge, l’alarme Permet de lire les fichiers sur la carte mémoire SD/MMC/MS/xD Permet de lire les fichiers sur carte mémoire CF Permet de lire les fichiers sur le lecteur USB REMARQUE: les icônes des fonctions précédentes apparaitront automatiquement sur l’interface MENU lorsqu’une carte mémoire est inséré
Autrement, appuyez sur la touche Enter pour accéder à l’affichage de la photo en mode plein écran (mode pause) et appuyez sur la touche Play pour accéder au mode Diaporama. Lorsqu’un diaporama est en cours de lecture ou lorsqu’une image est affichée, appuyez sur la touche OSD. Le menu suivant s’affiche: Précédent Permet de lire l’image précédente de la liste des photos Lecture ou Pause For information and support; www.lenco.
Permet de lire ou mettre en pause le diaporama en cours. Suivant Permet de lire l’image suivante de la liste des photos Rotation Utilisez la fonction rotation pour changer l’orientation de l’image : portrait ou paysage. Arrêt Permet d'arrêter le diaporama et de revenir aux miniatures. Zoom Sélectionnez la fonction Zoom pour effectuer un zoom avant sur image, répétez cette opération pour agrandir l’image à nouveau.
sélectionnée. Utilisez les touches directionnelles haut/bas pour sélectionner une vidéo et appuyez sur la touche Enter pour la lire. Une fois la vidéo en cours de lecture, appuyez sur la touche OSD de la télécommande. Le menu suivant s’affiche: Précédent Permet de lire la vidéo précédente de la liste de lecture Avance rapide Permet de lire la vidéo à une vitesse de 2/3/4 fois la vitesse normale. Lecture ou Pause Permet de lire ou mettre en pause la vidéo. For information and support; www.lenco.
Rembobinage Permet de lire la vidéo vers l’arrière à une vitesse de 2/3/4 fois la vitesse normale. Suivant Permet de lire la vidéo suivante de la liste de lecture Arrêt Permet d’arrêter la vidéo et de revenir à la liste de lecture Zoom Permet d’agrandir la taille de l’image de 2/3/4/1 fois. Ecouter une musique MP3 Assurez-vous qu’au moins un fichier MP3 soit stocké sur votre carte mémoire ou votre lecteur USB. Une fois ceci effectué: Sélectionnez le média flash désiré du menu principal.
de la zone musique se trouve sous la barre d’état. Utilisez les touches directionnelles Haut/Bas pour sélectionner le fichier musique et appuyez sur la touche Enter pour le lire. Appuyez sur la touche VOL+ pour augmenter le volume ou VOL- pour diminuer le volume. Appuyez sur la touche Play/Pause de la télécommande pour lire ou mettre en pause le fichier musique. Appuyez sur la touche Stop de la télécommande pour revenir à la liste des fichiers musique.
Les fichiers de la carte mémoire sélectionnée ou de la mémoire interne seront listés sur la partie gauche de l’écran. La partie droite de l’écran contient les informations du fichier. Utilisez les touches directionnelles Haut/Bas pour sélectionner un fichier image et appuyez sur la touche Enter pour accéder au mode plein écran (mode pause). Appuyez sur la touche Play de la télécommande, le diaporama audio démarre instantanément. Une fois le diaporama avec son en cours de lecture, appuyez sur la touche OSD.
Lecture ou Pause Pour lire ou mettre en pause le diaporama en cours. Suivant Pour lire la photo suivante de la liste des photos Rotation Utilisez la fonction rotation pour afficher l’image en mode portrait ou paysage. Arrêt Permet d’arrêter le diaporama et de revenir aux miniatures. Zoom Permet d’augmenter la taille de l’image de 2/4/8/16/1 fois.
Utilisez les touches directionnelles Haut/Bas pour sélectionner le répertoire de destination des fichiers. Appuyez sur la touche Droite pour confirmer. Appuyez sur la touche Enter pour démarrer la copie des fichiers. Suppression Sélectionnez le média flash désiré du menu principal. (SD/xD/CF/MS/USB/NAND-Mémoire interne) Sélectionnez l’option “FICHIER” du menu et appuyez sur la touche “ENTER” Une liste des fichiers disponibles s’affiche.
Mode op ratoire de la fonction CONFIGURATION Les options suivantes peuvent être configurées en utilisant l’option “SETUP” option du menu principal: Fonction Langue Durée du diaporama Mode de diaporama Mode Répétition de musiques Mode Répétition de vidéos Mode d’affichage Heure Alarme Défaut Description Inclus : Anglais, Français, Espagnol, Allemand, Suédois, Grec, Italien, Turc.
For information and support; www.lenco.
Questions fréquemment posées Support technique For information and support; www.lenco.
1) Q: Puis-je utiliser l’écran du cadre photo numérique comme un écran tactile ? A: L’écran LCD ne prend pas en charge la technologie tactile. Veuillez utiliser les touches de la télécommande pour contrôler le cadre photo numérique. 2) Q: Si je laisse la même photo affichée pendant une longue période, est-ce que ceci endommage l’écran LCD ? A: Non. Le cadre photo numérique peut afficher la même photo de manière continue, et ce, pendant une longue période.
le cordon d’alimentation CA à l’unité et que vous mettez en marche le cadre photo même sans la carte mémoire, vous devriez apercevoir un écran blanc. Si vous ne voyez pas cet écran, vérifiez le raccordement du cordon d’alimentation. Aucun écran de démarrage Impossible de lire le fichier La carte mémoire est mal insérée.
Alimentation Consommation d’énergie Luminosité Contraste Angle de vue Temps de réponse Format d’affichage Formats de fichiers supportés Résolution maximale des photos Alimentation Cartes mémoire compatibles Ports USB Contenu de l’emballage 12 V 24 Watts 450cd/m2 max.
Packungsinhalt ...................................................................................... - 71 Installation des Geräts ........................................................................... - 72 Anschluss an einen PC ......................................................................... - 72 Bedienung ............................................................................................. - 73 Tastenfeld ...............................................................................
Einleitung Herzlichen Glückwunsch zum Kauf dieses digitalen Bilderrahmens mit 15 Zoll Bildschirmdiagonale und der Modellbezeichnung DP-1520 Bevor Sie das Gerät in Betrieb nehmen, lesen Sie diese Bedienungsanleitung bitte gründlich durch. Bewahren Sie sie zum späteren Gebrauch auf. Diese Anleitung wird Ihnen dabei helfen, die vielen aufregenden und nützlichen Funktionen zu nutzen, dank denen Sie mehr Freude an Ihrem digitalen Bilderrahmen haben werden.
Loslegen Packungsinhalt Digitaler Bilderrahme und Standfuß Bedienungsanleitung Wechselstromadapter Fernbedienung USB-Kabel For information and support; www.lenco.
Installation des Geräts • • • • • Öffnen Sie die Verpackung und entnehmen den Schaumstoff. Entfernen Sie die Schutzhülle vom Gerät. Bringen Sie den Standfuß auf der Rückseite des digitalen Bilderrahmens an. Stecken Sie den Wechselstromadapter in eine Steckdose. Verbinden Sie das andere Ende mit dem Gerät. Nachdem der Inhalt auf dem Flash-Medium gespeichert wurde, stecken Sie es in den richtigen Einschubschlitz. Stellen Sie die Ein/Aus-Taste auf ON.
Bedienung Der digitale Bilderrahmen ist ganz einfach zu bedienen: 1. Die Speicherkarte aus der Kamera nehmen: 2. Die Speicherkarte in den Bilderrahmen stecken, so dass die beschriftete Seite vom Gerät weggerichtet ist: 3. Nach dem Einschalten des Bilderrahmens wird das Bild automatisch angezeigt. For information and support; www.lenco.
For information and support; www.lenco.
Tastenfeld For information and support; www.lenco.
Handhabung der Fernbedienung Fernbedienung Die folgende Tabelle beschreibt kurz die Funktionen der Fernbedienung Taste Beschreibung On/Off Ein/Aus: Den Bilderrahmen ein/ausschalten Mode Vol - Zwischen Foto-/Audio/Videomodus umschalten Lautstärke reduzieren Vol + Lautstärke erhöhen Slideshow Start der Diashow OSD Ruft das Bildschirmmenü auf. Menu Menütaste: Ruft das Hauptmenü auf.
Speicherkarten einstecken Der digitale Bilderrahmen ist zu den folgenden Speicherkarten kompatibel: • • • • • Secure Digital Card (SD) MultiMedia Card (MMC) Memory Stick CompactFlash (CF) Card XD Picture Cards TM TM TM TM Stecken Sie die Speicherkarte so ein, dass die beschriftete Seite von Ihnen WEGgerichtet ist. Schieben Sie die Speicherkarte nicht mit Gewalt in den Einschubschlitz.
Benutzen Sie die Richtungstasten (rechts/links) zur Steuerung des Menüs und die Eingabetaste zur Bestätigung.
• Das Vorschaubild eines Fotos erscheint. Sie können die Markierung mit den Richtungstasten (hoch/runter/links/rechts) bewegen. Falls ein Verzeichnis markiert ist, können Sie das Verzeichnis mit der Eingabetaste öffnen. • Andernfalls bewirkt Drücken der Eingabetaste, dass das Bild auf dem ganzen Bildschirm angezeigt wird (Pausenmodus). Drücken Sie die Wiedergabetaste, um die Diashow zu starten. • Wenn eine Diashow läuft oder ein Bild angezeigt wird, können Sie die OSD-Taste drücken.
Zurück Das vorherige Bild der Bilderliste anzeigen Wiedergabe/Pause Die aktuelle Diashow wiedergeben oder pausieren. Weiter Das nächste Bild der Bilderliste anzeigen Drehen Benutzen Sie die Drehfunktion, um die Ausrichtung des Bilds auf Hoch- oder Querformat zu ändern. Stop Die Diashow anhalten und zur Bildvorschau zurückkehren. Zoom Zum Vergrößern des Bilds. Wiederholtes Drücken vergrößert das Bild noch weiter.
• • Motion JPEG (*avi): Das Videoformat, das von den meisten digitalen Kameras verwendet wird MPEG-1 &MPEG-2 –w/layer I,II,III (*MPG,*MPEG,*DAT) MPEG 4-W/MP3-audio (*avi) Achten Sie darauf, dass sich mindestens ein Video auf Ihrer Speicherkarte oder Ihrem USBFlash-Laufwerk befindet. Danach: • • • Im Hauptmenü den zutreffenden Flash-Datenträger wählen.
Während ein Video abgespielt wird, können Sie die OSD-Taste auf der Fernbedienung drücken. Das folgende Menü erscheint: Zurück Das vorherige Video der Wiedergabeliste abspielen Schnellvorlauf Das Video mit 2-, 3-, 4-facher Geschwindigkeit abspielen. Wiedergabe/Pause Das Video abspielen oder pausieren. For information and support; www.lenco.
Schnellrücklauf Das Video mit 2-, 3-, 4-facher Geschwindigkeit rückwärts abspielen. Weiter Das nächste Video der Wiedergabeliste abspielen Stop Das Video anhalten und zur Wiedergabeliste zurückkehren Zoom Die Bild um den Faktor 2/3/4/1 vergrößern. MP3-Musikdateien abspielen Achten Sie darauf, dass sich mindestens eine MP3-Datei auf Ihrer Speicherkarte oder Ihrem USB-Flash-Laufwerk befindet. Danach: • • • • Im Hauptmenü den zutreffenden Flash-Datenträger wählen.
• Mit VOL+ die Lautstärke erhöhen und mit VOL- verringern. • Mit der Wiedergabe/Pause-Taste der Fernbedienung eine Musikdatei abspielen oder pausieren. • Mit der Stop-Taste der Fernbedienung zur Liste der Musikdateien zurückkehren. File-Menü Eine Diahows mit Hintergrundmusik abspielen Achten Sie darauf, dass sich mindestens ein Bild auf Ihrer Speicherkarte oder Ihrem USB-FlashLaufwerk befindet.
• Eine Liste aller Dateien auf der gewählten Speicherkarte bzw. im internen Speicher wird auf der linken Seite des Bildschirms angezeigt. Auf der rechten Seite werden Dateiinformationen angezeigt. Mit den Richtungstasten (hoch/runter) eine Bilddatei wählen und die Eingabetaste drücken, um das Foto auf dem ganzen Bildschirm anzuzeigen (Pausenmodus). Die Wiedergabetaste der Fernbedienung drücken. Die Diashow wird gestartet. • Während eine Audio-Diashow abgespielt wird, können Sie die OSD-Taste drücken.
Kopieren und Löschen von Dateien Zum Kopieren oder Löschen von Dateien auf der Speicherkarte, dem USB-Laufwerk oder im internen Speicher. Kopieren • Im Hauptmenü den zutreffenden Flash-Datenträger wählen. (SD/xD/CF/MS/USB/NANDInterner Speicher) • Im Menü FILE wählen und die Eingabetaste drücken • Eine Liste der verfügbaren Dateien wird angezeigt. Mit den Richtungstasten (hoch/runter) die gewünschte Datei markieren und mit der rechten Richtungstaste bestätigen.
• Mit den Richtungstasten (hoch/runter) das Zielverzeichnis für die Datei wählen. Mit der rechten Richtungstaste bestätigen. • Mit der Eingabetaste den Kopiervorgang starten. Löschen • • • • Im Hauptmenü den zutreffenden Flash-Datenträger wählen. (SD/xD/CF/MS/USB/NANDInterner Speicher) Im Menü FILE wählen und die Eingabetaste drücken Eine Liste der verfügbaren Dateien wird angezeigt. Mit den Richtungstasten (hoch/runter) die gewünschte Datei markieren und mit der Eingabetaste bestätigen.
Das SETUPSETUP-Men Die folgenden Optionen können über das SETUP-Menü, das im Hauptmenü zugänglich ist, geändert werden: Funktion Language (Sprache) Slideshow time Slideshow mode Music Repeat Mode Movie Repeat Mode Display mode Time Alarm Default Beschreibung Englisch, Französisch, Spanisch, Deutsch, Schwedisch, Griechisch, Italienisch, Türkisch.
For information and support; www.lenco.
Technische Technische Hilfe Häufig gestellte Fragen 1) F: Kann ich den digitalen Bilderrahmen durch Berühung des Bildschirms bedienen? A: Es handelt sich bei dem LCD-Bildschirm nicht um einen Sensorbildschirm. Bitte verwenden Sie das Tastenfeld oder die Fernbedienung, um den digitalen Bilderrahmen zu bedienen. 2) F: Kann der LCD-Bildschirm Schaden nehmen, wenn ich ein bestimmtes Bild sehr lange anzeigen lasse? A: Nein. Der digitale Bilderrahmen kann ein Bild lange Zeit ohne Unterbrechnung anzeigen.
Fehlerbehebung Symptom Der digitale Bilderrahmen lässt sich nicht einschalten Ursache Der Stromstecker des Geräts ist nicht richtig eingesteckt. Abhilfe Achten Sie darauf, dass der Wechselstromadapter richtig mit dem Bilderrahmen verbunden ist. Auch ohne Speicherkarte sollten Sie einen weißen Bildschirm sehen, wenn Sie den Wechselstromadapter an den Bilderrahmen anschließen und das Gerät einschalten.
Vergrößerung die Zoom-Taste der Ferndienung. For information and support; www.lenco.
Technische Daten Typ Interner Speicher Auflösung Stromversorgung Stromverbrauch Leuchtstärke Kontrast Blickwinkel Reaktionszeit Bildschirmmodus Dateiformat Fotogröße Netzspannung Karten USB-Schnittstellen Packungsinhalt 15 Zoll digitaler Bilderrahmen 128MB 1024x768 12 V 24 Watt 450cd/m2 max.
For information and support; www.lenco.
Tabla de contenidos Introducción .............................................................................................. - 96 Características principales ........................................................................ - 96 Iniciación ................................................................................................... - 97 Contenido del paquete .......................................................................... - 97 Instalación de su unidad .............................
Introducci n Enhorabuena por la adquisición del Marco para Fotos Digitales de 15 pulgadas, modelo DF-1520 Antes de operar con la unidad, por favor, lea este manual de principio a fin, y consérvelo para futuras referencias. Este manual le ayudará a usar muchas de las excitantes y útiles funciones que harán del uso de su Marco para Fotos Digitales un puro disfrute. Este Marco para Fotos Digitales le permitirá ver imágenes digitales directamente desde las tarjetas de memoria de su cámara digital.
• Visualización en pantalla accesible para el usuario, que le permite un manejo sencillo de todos los controles. *Los archivos de vídeo podrían reproducirse de un modo anormal si estuvieran almacenados en una tarjeta de baja velocidad. Iniciaci n Contenido del paquete Marco para Fotos Digitales y pie de soporte Guía del usuario Adaptador AC/DC Mando a distancia Cable USB For information and support; www.lenco.
Instalación de su unidad • • • • • Abra el paquete y retire la espuma protectora. Retire también la funda protectora de la unidad. Coloque el pie del Marco para Fotos Digitales en la parte posterior de la unidad. Enchufe el adaptador AC a una toma de corriente. Conecte el otro extremo a la unidad. Cuando el contenido se encuentre almacenado en el dispositivo de memoria, inserte este en la ranura de entrada correcta. Encienda el aparato (posición ON) con el interruptor ON/OFF.
Funcionamiento El funcionamiento con el Marco Digital es extremadamente sencillo: 1. Extraiga la tarjeta de memoria de la cámara: 2. Introduzca la tarjeta de memoria en el marco con la cara mirando hacia el interior: 3. Al encender el marco, la imagen se mostrará automáticamente. For information and support; www.lenco.
For information and support; www.lenco.
Controles For information and support; www.lenco.
Uso del mando a distancia La tabla siguiente describe brevemente las funciones del mando a distancia: Botón Descripción On/Off Encendido/apagado del marco Mode Selector de modo Foto/Audio/Vídeo Vol - Disminución del volumen Vol + Aumento del volumen Slideshow Inicio de la presentación de fotos OSD Visualización del menú de imágenes Menu Visualización del menú principal Rotate Rotación de la imagen en reproducción Enter Confirmación Zoom Aumento de la imagen en reproducción Reproducción
Introducci n de tarjetas de memoria El Marco para Fotos Digitales es Compatible con las siguientes tarjetas de memoria: • • • • • Secure Digital (SD) MultiMedia Card (MMC) Memory Stick CompactFlash (CF) XD Picture TM TM TM TM Introduzca la tarjeta de memoria con la etiqueta mirando hacia el interior. No fuerce la tarjeta al meterla en la ranura. Si no pudiera introducir completamente y con facilidad la tarjeta de memoria, es muy probable que la haya insertado de forma incorrecta.
Men principal Habiendo encendido el Marco para Fotos Digitales, irá directamente a la pantalla del MENU. Para establecer la función de inicio automático (Auto Start), seleccione la pantalla SETUP (Configuración). Utilice la flecha izquierda/derecha para desplazarse hasta “Set up”. Pulse el botón Enter para entrar en la pantalla de opciones. Use las flechas arriba / abajo para seleccionar la opción de inicio automático.
Emplee las flechas izquierda y derecha para desplazarse por el menú, pulse después “Enter” para continuar.
• Aparecerá entonces una serie de fotos en miniatura. Emplee las flechas ARRIBA/ABAJO/IZQUIERDA/DERECHA para mover el contorno destacado. Si el contorno destacado fuera una carpeta, pulse Enter para entrar en ella. • Si no, pulse Enter para entrar en la foto a tamaño completo (modo pausa) y pulse reproducción (Play) para entrar en el modo de presentación de fotografías (slideshow). • Una vez la presentación de fotografías esté en reproducción, o se esté mostrando una imagen, pulse el botón OSD.
Anterior Reproduce la imagen anterior de la lista de imágenes. Reproducción o pausa Para reproducir o dejar en pausa la presentación de fotografías en curso. Siguiente Reproduce la imagen siguiente de la lista de imágenes Rotación Use la opción de rotación de imagen para cambiar la orientación de la imagen a retrato o paisaje. Stop Detiene la presentación de fotografías y vuelve al modo de fotos en miniatura. Zoom Seleccione la función de zoom para aumentar la imagen.
• • Motion JPEG (*avi): formato de vídeo usado en la mayoría de cámaras digitales MPEG-I y MPEG-2 –w/capa I,II,III(*MPG,*MPEG,*DAT) MPEG 4-W/MP3 audio (*avi) Asegúrese de que su tarjeta de memoria o dispositivo USB de memoria flash contienen al menos un archivo de vídeo. Una vez hecho esto: • • • Seleccione el sistema de reproducción flash del menú principal.
Anterior Reproduce la película anterior de la lista de reproducción. Avance rápido Reproduce la película hacia delante a las velocidades x2/x3/x4. Reproducción o pausa Reproduce o deja en pausa la película. Retroceso rápido Reproduce la película hacia atrás a las velocidades x2/x3/x4. Siguiente Reproduce la película siguiente de la lista de reproducción. Stop Detiene la película y vuelve a la lista de reproducción. Zoom Aumenta el tamaño de la imagen hasta x2/x3/x4/x1veces.
• • Seleccione el sistema de reproducción flash del menú principal. (SD/xD/CF/MS/USB/NAND-Memoria interna) Seleccione la opción “MUSIC” del menú y pulse “ENTER” • Se mostrará una lista de archivos de música en la parte izquierda de la pantalla. La parte derecha consiste en un cuadro de frecuencia y una barra de estado con información. La parte con información sobre la canción se encuentra debajo de la barra de estado.
Asegúrese de que haya al menos una imagen almacenada en la tarjeta de memoria o su dispositivo USB de memoria flash. Además, deberá haber guardado un archivo MP3 en la tarjeta de memoria seleccionada /USB/memoria interna. Una vez hecho esto: • • Seleccione el sistema de reproducción flash del menú principal.
Reproducción o pausa Para reproducir o dejar en pausa la presentación de fotografías en curso. Siguiente Reproduce la imagen siguiente de la lista de imágenes Rotación Use la opción de rotación de imagen para cambiar la orientación de la imagen a retrato o paisaje. Stop Detiene la presentación de fotografías y vuelve al modo de fotos en miniatura. Zoom Aumenta el tamaño de la imagen hasta x2/x4/x8/x16/x1 veces.
• • • • • • • Seleccione el sistema de reproducción flash del menú principal. (SD/xD/CF/MS/USB/NAND- Memoria interna) Seleccione la opción “FILE” del menú y pulse “ENTER” Se mostrará una lista de archivos disponibles. Use las flechas arriba y abajo para destacar el archivo que le interese y pulse la flecha derecha para destacar el archivo que desee. Repita este proceso para todos los archivos que quiera copiar. Pulse el botón “OSD” para mostrar el menú Copy (Copiar) y Delete (Eliminar).
• • • • Seleccione el sistema de reproducción flash del menú principal. (SD/xD/CF/MS/USB/NAND-Memoria interna) Seleccione la opción “FILE” del menú y pulse “ENTER” Se mostrará una lista de archivos disponibles. Use las flechas arriba y abajo para destacar el archivo que le interese y pulse la flecha derecha para destacar el archivo que desee. Repita este proceso para todos los archivos que quiera eliminar. Pulse el botón “OSD” para mostrar el menú Copy (Copiar) y Delete (Eliminar).
Visualización del calendario/hora Habiendo encendido el Marco para Fotos Digitales, irá directamente a la pantalla MENU. Si selecciona el calendario/hora (Calendar/Clock) y pulsa Enter, pasará a la pantalla del calendario/hora. Si la alarma estuviera activada, también mostrará la hora de la alarma. Una presentación de fotografías dará comienzo en la ventana de vista previa de imágenes de la parte derecha de la pantalla. For information and support; www.lenco.
Soporte t cnico Preguntas frecuentes 1) Puedo usar tecnología de pantalla táctil para mi Marco de Fotos Digitales? R: La pantalla LCD no incluye soporte para tecnología de pantalla táctil. Por favor, limítese al uso de los botones y el mando a distancia para manejar su Marco para Fotos Digitales. 2) Si muestro la misma imagen durante un largo periodo de tiempo, podré así dañar la pantalla LCD? R: No.
6) Cómo es que el Marco para Fotos Digitales no muestra algunas de mis fotos? R: El Marco para Fotos Digitales está diseñado para mostrar fotos que sigan formatos con los mismos estándares que los de las cámaras digitales. Este formato es el JPEG. Las imágenes, como las de páginas web, imágenes escaneadas o fotos en el formato RAW, no se almacenan de acuerdo con los estándares de la industria de las cámaras y, por lo tanto, no podrán mostrarse correctamente en el Marco para Fotos Digitales.
• MP3 Formatos de vídeo compatible: Motion JPEG (avi), MPEG1, MPEG2, MPEG4. El vídeo no se reproduce adecuadamente Tarjeta de memoria lenta Asegúrese de que utiliza una tarjeta de memoria de alta velocidad para reproducir archivos de vídeo. Tamaño de vídeo pequeño en la pantalla Resolución de vídeo baja La mejor resolución aceptada de una foto o vídeo es 1024x768 Use el botón Zoom en el mando a distancia para aumentarla.
Pie de soporte Si en lo sucesivo tuviera que deshacerse de este producto, por favor, fíjese en que: La eliminación de productos eléctricos no debe hacerse junto con los desechos del hogar. Por favor, recicle haya donde se disponga de instalaciones a tal efecto. Consulte a las autoridades locales o a su distribuidor sobre los consejos de reciclaje (Directiva sobre la Eliminación de Equipos Eléctricos y Electrónicos). http://www.lenco-audiovideo.com For information and support; www.lenco.