Datasheet

Additional Operation
there are four different angles available. (This feature is disc-dependent. If no additional camera
angles are available, the “Invalid Key” will be displayed.)
14. Mute the Audio Output (compatible with DVD, VCD, CD, CD-G, DTS-CD, HD-CD,
WMA, MP3/JPEG discs)
Pressing the Mute button allows you to reduce sound to an inaudible level, and “MUTE” will
be displayed on screen. Press the button again or press the Vol +/- button to return to the normal
condition.
Notes:
 When mute, the microphone also has no audio output.
 If the player playback disc without sound, please try to press Mute button to
resume.
15. Zoom In the Video Image (compatible with DVD, VCD, JPEG discs)
a) The Zoom Function allows you to enlarge or zoom out the video image and to pan
though the image. Press Zoom repeatedly to activate the function and choose the
required zoom factor: Zoom 2, Zoom 3,Zoom 4, Zoom 1/2, Zoom 1/3, Zoom 1/4, Zoom
Off.
Notes:
 This feature does not work when the Disc Menu appears.
b) Use the Arrow buttons to pan across the screen when the zoom factor is 2 ,3 or 4.
16. Repeat a Specific Segment on the Disc that You Define (compatible with DVD,
VCD, CD, CD-G, DTS-CD, HD-CD, WMA, MP3 discs)
a) During the normal or fast motion playback, press the A-B button once, and “REPEAT
A-” will appears on the screen. This indicates the start of the loop to be repeated.
b) During the normal of fast motion playback, press A-B again, and “REPEAT A-B” will
appears on the screen. It indicates the end of the loop.
 Looping will run from set point A to set point B until you turn off Repeat.
c) Press A-B again to cancel A-B loop mode.
 When playing a VCD, or CD disc, you can repeat a specific segment only in
one track. When the next track begins, A-B Repeat turns off automatically.
 When playing a DVD disc, you can repeat a specific segment only in one title /
chapter.
17. Volume control (compatible with DVD, VCD, CD, CD-G, DTS-CD, HD-CD, WMA,
MP3/JPEG discs)
 You can press the Volume button on the front of TV set or the amplifier to control the
sound level.
 Pressing the Vol+ button on the remote allow you to amplify the sound level; Pressing
Vol- will reduce the sound level.
Notes:
 During DVD PCM output playback, this feature does not work.
10