User guide

Page 10 of 16
Radio
Tuning to a radio station
1.Press the STANDBY button.
2.Press the MODE button repeatedly until Tuner is shown on the LCD Display.
3.Press and hold either the FWD or RWD buttons to search for a station.
4.To fine tune a station briefly press either the FWD or RWD buttons.
DON’T FORGET! You may need to reposition the Speaker Dock to get the best reception.
Storing a radio station using the remote control
1.Tune to a radio station as described above.
2.Press the MEM button. MEM and a number will be shown on the LCD Display.
3.Press the UP or DOWN ARROW buttons to select the number you want to store the radio station
against.
4.Press the MEM button again to store the station.
5.Repeat this procedure to store other radio stations.
DON’T FORGET! You can store a maximum of 20 stations.
Moving a stored radio station to a new preset position
1.Tune the radio station as described above.
2.Press the MEM button on the Speaker Dock or the remote control once to show current preset.
3.Press the UP or DOWN ARROW buttons on the remote control to select the new preset number.
4.Press the MEM button to store the radio station in the new preset.
DON’T FORGET! This will overwrite any previous stored station on the selected preset
Listening to a stored station
1.Store a radio station as described previously.
2.Press the UP or DOWN ARROW buttons to cycle through the stored stations.
AUX in
Other audio devices, such as an MP3 player can be connected to the Speaker Dock. A 3.5 mm
stereo cable is supplied, and a pair of RCA phono sockets are located on the rear panel for this
purpose.
1.Connect your chosen audio device.
2.Press the MODE button repeatedly until AUX is shown on the LCD Display.