Instruction manual

ManualsBrandsLenco ManualsComputersIPT-223

0 1

INSTRUCTION MANUAL

DVD/CD PLAYER

WITH iPod/iPhone DOCKING &

SD/MMC CARD READER

WITH PLL FM STEREO RADIO AND 3D SOUND

MODEL: IPT-223

Please read following instructions prior to operating your unit.

Manufacturer of this unit follows a principle of continuous improvement and has no responsibility for any

changes that are made to the unit nor any liability for these changes. Thanks for your choice of our

products.

For information and support, www.lenco.eu

27 18

Summary of content (6 pages)

PAGE 1
3 INSTRUCTION MANUAL DVD/CD PLAYER WITH iPod/iPhone DOCKING & SD/MMC CARD READER WITH PLL FM STEREO RADIO AND 3D SOUND MODEL: IPT-223 10 26 1 4 2 5 27 18 6 7 8 9 Please read following instructions prior to operating your unit. Manufacturer of this unit follows a principle of continuous improvement and has no responsibility for any changes that are made to the unit nor any liability for these changes. Thanks for your choice of our products. For information and support, www.lenco.
PAGE 2
MAIN UNIT 1. PREV/TUNE- BUTTON 2. STOP BUTTON 3. iPod/iPhone DOCKING 4. NEXT/TUNE+ BUTTON 5. PLAY/PAUSE BUTTON 6. VOLUME CONTROLLER 7. REMOTE SENSOR 8. MEM BUTTON 9. CH+ BUTTON 10. CH- BUTTON 11. TONE BUTTON 12. LCD DISPLAY 13. STANDBY BUTTON 14. FUNCTION BUTTON 15. EJECT BUTTON 16. SLEEP BUTTON 17. SD/MMC CARD SLOT 18. SCART OUTPUT SOCKET 19. FM PIGTAIL ANTENNA 20. RIGHT AUX IN JACK 21. LEFT AUX IN JACK 22. VIDEO OUT JACK 23. POWER ON/OFF BUTTON 24. AC SOCKET 25. STAND FEET 26. DISC TRAY 27.
PAGE 3
SLEEP FUNCTION Press SLEEP button at power on mode. Each time SLEEP button is pressed, the display changes Sleep time in a sequence as follows: 90 80 70 60 50 40 30 20 10 OFF When the sleep time is expired, the unit will switch off automatically. iPod/iPhone OPERATING PLAYING AN iPod/iPhone 1. Dock an iPod/iPhone onto the unit. 2. Press the POWER ON/OFF button on the rear of the unit and press STANDBY button to turn the unit on. 3. Press the FUNCTION button continuously to toggle the unit to IPOD mode. 4.
PAGE 4
REPEAT Press REP button during play, it will repeat play one chapter/title or repeat all (for DVD disc), or repeat play a track or all tracks (for CD), or press A-B button to repeat play the sections between two specific points (A-B). PROGRAM PLAY (UP TO 16 MEMORIES) 1. Press PROGRAM during playback to display the program menu. 2. Select location(s) to be memorized via navigation buttons and then enter desired Titles/Chapters numbers via numeric buttons.
PAGE 5
COMMON PROCEDURES FOR INITIAL SETTINGS 1. Press SETUP button to access the setup menu. 2. Use the navigation buttons to select the item you want to modify, setting page with further setting items displayed shows on the TV screen. Again use navigation buttons to make changes. Press ENTER button to confirm modifications. 3. Use navigation buttons to switch to another setting on the main setting page. 4. Press SETUP button to exit main setting page. 1. SYSTEM SETUP 1.
PAGE 6
SPECIFICATIONS Power source: AC 230V 50Hz Power consumption: 90W Remote control: Cell Battery CR2025 Receiving bands: FM 87.5 -108 MHz Speaker Size: AROUND 2.5 INCH SUB 6.5 INCH TV Output (DVD): NTSC/PAL Dimensions: 305(L) x 315(W) x 933(H) mm Operating Humidity Range: 10 % to 75 % Operating Temperature Range: +5°C to + 35°C Compatible with SD/MMC CARD Disc supportable: CD, CD-R, CD-RW, DVD, DVD-R, DVD-RW, DVD+R, DVD+RW Support disc format: DVD/MP3/KODAK PHOTO CD/JPEG/MPEG4 Audio signal output: 1.