MDV-15 DVD MICOR HI-FI SYSTEM WITH CASSETTE, USB AND CARDREADER INSTRUCTION MANUAL For information and support, www.lenco.
FOREWORD THANKS Dear Customer, May we take this opportunity to thank you for purchasing this player. We strongly recommend that you carefully study the User Manual before attempting to operate the unit and that you note the listed precautions. 1. Ensure a minimum distance of 5 cm around the apparatus for sufficient ventilation. 2. The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-clothes, curtains, etc. 3.
CONTENT FOREWORD.............................................................................................................1 CONTENT.................................................................................................................2 WARNING.................................................................................................................2 PANELS.....................................................................................................................3 REMOTE CONTROL..
PANELS 1. DISPLAY SCREEN 2. STANDBY BUTTON 3. VOLUME+/- KNOB 4. FM BUTTON 5. TAPE BUTTON 6. AUDIO BUTTON 7. REMOTE CONTROL SENSOR 8. DVD BUTTON 9. PLAY/ENTER BUTTON 10. STOP BUTTON 11. TAPE FAST FORWARD BUTTON 12. TAPE PAUSE BUTTON 13. TAPE STOP/OPEN BUTTON 14. TAPE FAST REWIND 15. TAPE RECORD BUTTON 16. TAPE PLAY BUTTON 17. EARPHONE JACK 18. USB PROT 19. CARD PORT 1. FM ANTENNA INTERFACES 2. L/R AUDIO INPUT 3. L/R AUDIO OUTPUT 4. COAXIAL OUTPUT 5. L/R SPEAKER OUTPUT 6. OPTICAL FIBER OUTPUT 7.
REMOTE CONTROL NOTE: 1. Turn on the player, insert the batteries into the remote control, and direct the remote control at the remote sensor on the front panel. 2. Remote control functions at the distance of 7 m (not more) from the player. 3. If the remote control sensor or IR-radiator is closed, the remote control will not operate or there will be an interference. 4. Interference from the high tension appliances, generating high frequency signal can strongly influence the work of the remote control.
CONNECT TO THE TV-SET 1. If your TV-set has AV input, use the AV cable to connect the player to the TV-set. After you make sure the connection is right, give AV status to the TV-set in the settings. 2. If your TV-set has S-video input, use S-video cable to connect the player to the TV-set. This type of connection provide the best quality of picture. 3. If your TV-set has Pb/Cb, Y, Pr/Cr input, use six headed jack cable to connect the player to the TV-set.
CONNECT TO THE AMPLIFIER Digital audio output setting Connect coaxial or optical output of the player to the corresponding inputs of the amplifier. During playing a disc or stop, press the SETUP button on the remote control to open the DVD menu page. Use direction buttons to move to the Audio setup pageļ¼ Also, move the cursor downwards to Digital audio setup by using the direction buttons; then use the Right direction button again to move to SPDIF setup.
SYSTEM CONNECTION Before connection of the acoustic equipment, pay attention to the picture below. Each connection must be safe and firm. Connect the power at last.
BASIC OPERATION Preparation 1) Before turn on the unit, check if all the connections are right and safely made. Insert The plug in the corresponding power socket. 2) Press the POWER button on the front panel of this unit. 3) Press the EJECT button on front panel of this unit, then put the disc on the disc holder and press this button again. The player will start playing. Mute button If you press the MUTE button during playing, sound signal will not be heard, but the picture will remain.
BASIC OPERATION Repeat While in playing mode, press the REPEAT button to set repeat mode. 1. For DVD, as you press the REPEAT button, the TV screen will displays: Chapter, Title, All. 2. For VCD, CD, CD-R discs, press the REPEAT button, the screen will displays: Track, All. 3. For MP3, JPEG and other media files, the screen will displays: Single, Repeat one, Repeat Folder, Repeat off. A-B Repeat While in playing mode, press the A-B REP button to set the section for repeating. 1.
BASIC OPERATION Pause During playing a disc, press the PAUSE button to pause, press this button again or PLAY/ENTER button to continue playing. Menu While playing a VCD, press the MENU button , PBC current state view mode will be Opened /closed. 1. During playing DVD, press the MENU button to go into the root menu status. 2. Some pirate discs do not support this function. Angle view selection In playing mode, press the ANGLE button to switch angle view (if a disc supports this functi).
BASIC OPERATION Zoom In playing status, press ZOOM button the TV screen display will be zoomed in 2 times, 3 times, 4 times, 1/2time, 1/3time, 1/4time. Shortcut When playing DVD discs, press the SHORTCUT button to skip the initial title, menu or warnings (If the disc supports this function). Reset In No Disc status, pressing RESET button can return to the original setup or the default value. Clear Press the CLEAR button to cancel the data you have entered. For example, the setting of programmed songs.
BASIC OPERATION VCD disc display: DVD disc display: You can press the direction key to move the cursor to the setting option according to the above-mentioned screen suggestions, then press PLAY/ENTER to confirm and use number keys to input the corresponding time numbers, after it is done, DVD player will start to play according to the setting time. When press the Down direction button, you can see the next item in the above screen.
BASIC OPERATION 2. Press the direction button to move the cursor to a directory, the press the PLAY/ ENTER button to enter the directory. 3. Press the direction buttons to enter the subdirectory or the file area, select a song with the cursor, then press the PLAY/ ENTER button to play the song . To select other songs under the current directory during playing, press up or down direction button, or PREV.
BASIC OPERATION USB/CARD This is latest function realized only in new generation multimedia DVD-players. Connecting the USB or Card device while playing a disc does not influence the quality of playing.In order to view the contents of the USB device, the following steps need to be performed. 1. Connect the USB or Card device to the unit. Press the USB/CARD button on the remote control. The player will automatically detect the device.
MENU SETUP DVD MENU SETUP To access the DVD menu: 1. Press the SETUP button. 2. Press the direction buttons to switch between the different setup pages. 3. Press the direction button to move the cursor to the position you want, then press the PLAY/ENTER button again to enter the subdirectory. 4. Press the PLAY/ENTER buttons again to enter the next subdirectory. Note: In any menu, you can press the up and down direction buttons to move the cursor and press the PLAY/ENTER button to enter the selected items.
MENU SETUP Video Setup Page 1. Video Output This option is used to set the video output mode: S-video,YPbPr, RGB. Note: Make sure that you set the player to the correct video mode. 2. TV Display (4:3PS, 4:3LB,16:9 ) 1) No matter which format you select, if the screen is 4:3 display, the image is displayed in 4:3. 2) The DVD screen format is changeable. 3) When the screen displays in 4:3, the display format of DVD is 16:9, the image will be compressed horizontally. 3.
MENU SETUP Audio Setup Page 1. Analog Audio Setup 1) Surround LT/RT: audio output from Left and Right channel Stereo: stereo audio output 2) Dual Mono This option is used to set the mode of audio output, including L-Mono, R-Mono, Mix-Mono,and Stereo. 3) Dolby-Dynamic This option is chosen when Line output is selected for the compression mode. Linear compression ratio is adjusted to acquire different compression effects. . 2.
MENU SETUP 3) Treble Boost ON: set the treble boost on and adjust the treble effect. OFF: set the treble boost off. System Setup Page (This setup page only be available when the player in No Disc or Eject status.) 1. Angle Mark When the disc has multi-angle pictures, setting the Angle Mark displays a multi-angle mark on the screen. This option has two settings: ON: Display multi-angle mark OFF: Multi-angle mark is not displayed 2.
MENU SETUP Password Setup Page 1. Parental Control This unit has 8 different age ratings that can be selected. Move the cursor to select one of them, then press Play/Enter button on the remote control to enter. You are reminded to input the password. 2. Password The original password of this unit is" 1389" and you can change it to a new one.
RADIO OPERATION 1. Enter FM Function In the turn-on or playing status, press the FM button on the remote control (or front panel) to enter FM mode. 2. Select Bands 1) Directly input frequency: press the T/F button on the remote control, then input the frequency that you want. The range of FM frequency is from 87.50MHz to 108.00 MHz. 2) Select the band by pressing Tune- or Tune+ button: press this button to adjust the frequency up or down a step. The step of FM is 0.05 MHz.
CASSETTE OPERATION 1. Preparation 1) Turn on this unit; and press TAPE button on the front panel or on the remote control to switch to tape playing status. 2) Press the open mark on the cassette door to open the cassette; place a tape in (keep the tape in the right place);close the cassette door. Press the PLAY/ENETR button to play. 2. Fast forward and fast backward Press Fast rewind or Fast forward button on the front panel to play backward or forward.
SPECIFICATION Disc type DVD DVCD VCD SVCD CD CD-R MP3 MPEG 4*, Divx (hereinafter 5.0 and 5.0) Video format MPEG2 for DVD, and MPEG1 for VCD Audeo format MPEG1, MPEG2, PCM; Stereo and 2.0CH Signal output Video format: NTSC, PAL, MUL Video output: 1.0 Vp-p Audio: 2.
TROUBLE SHOOTING For your convenience, we have listed some methods to solve common problems you may encounter when you using the system. If the problem occurs repeatedly , contact the nearest maintenance center.