Instruction manual

5
CONNECT TO THE TV-SET
1. If your TV-set has AV input, use the AV cable to connect the player to the TV-set.
After you make sure the connection is right, give AV status to the TV-set in the settings.
2. If your TV-set has S-video input, use S-video cable to connect the player to the TV-set.
This type of connection provide the best quality of picture.
3. If your TV-set has Pb/Cb, Y, Pr/Cr input, use six headed jack cable to connect the
player to the TV-set. This type of connection make the picture more natural.
4. This unit has an output interface for Scart output, which can directly be connected
with TV-set.
NOTES:
1. Before connecting the player to the TV-set, turn off and unplug the both units.
2. During playing a disc we recommend to change settings of the player in order to make
it compatible with the TV-set.
3. You can connect the player the TV-set in different ways. Choose only one of them.
Multiple connections negatively influent the source and picture quality.
4. Do not turn ON/OFF the player very often. The interval must be min. 3 seconds.
5. Do not use digital coaxial or optical output of the player and analogue output at the
same time.