Instruction manual

6
CONNECT TO THE AMPLIFIER
Digital audio output setting
Connect coaxial or optical output of the player to the corresponding inputs of the
amplifier. During playing a disc or stop, press the SETUP button on the remote control
to open the DVD menu page. Use direction buttons to move to the Audio setup page；
Also, move the cursor downwards to Digital audio setup by using the direction
buttons; then use the Right direction button again to move to SPDIF setup. Select the
digital output and set SPDIF/RAW or SPDIF/PCM. Then press the PLAY/ENTER
button to save the selected value. Finally, press the SETUP button again to exit the
setup menu.