Model: MP3 Sportwatch-100 Quick Guide For information and support: www.lenco.com 1 B. 8 2 7 3 6 4 5 1 A. Controls and Connections 1. TFT With Touch Function (Capacitive Touch Panel) 2. Button (Volume Up / Value ) 3. Button (Volume down / Value ) 4. Button (Power On/Off, Mode, Reset) 5. 3.5mm Earphone Jack (For Earphone Set) 6. Micro USB Port (PC Connection / Charge) 7. Splash Proof Cover 8.
B. Charging the battery Make sure that the computer is turned on. Connect the player to the computer by using the USB cable. Now the computer will detect and install the driver automatically. Once the installation is complete, the player will be displayed in “My Computer” or for MAC users on the desktop. Note: For Windows 98/98SE the driver needs to be installed first. Once connected to a computer the player will charge automatically. After 2 ~ 3 hours the battery is fully charged.
Item 1 2 3 Key Function Press this button Press and hold this button Press this button Press and hold this button Press this button Press this button Press and hold this button Press and hold 10s~ 12s Function Description Volume / Value Volume / Value continually Volume / Value Volume / Value continually Wake up from clock / Clock, Interface display Power On Power Off Reset the Player D. Turn ON/OFF player button to power “ON” the player, the clock time will display as priority.
folder name to enter and view the file(s). In file’s list screen, slide to right on screen to exit to previous list for selection, or tap the desired file to start the play. One desired file is chosen, the file will play automatically by the relevant interface program. In Now Playing interface, press/pressing the function’s key and or tap the relevant icon, or slide to Up / Down / Left / Right on screen for the wanted function. (refer to item C above mentioned for reference) F.
looking your desired name of device when necessary, wait for few seconds both device should be paired, the current music will play automatically from your Bluetooth receiver device, and a Bluetooth icon “ “is displaying at the right side of chosen device item in list. Both devices are paired. Change playing music file: In Bluetooth transmitting mode, exit and go into Music Now Playing interface for change the playing file if necessary. In Music Now Playing interface, tap / icon for changing play file.
This Player can turn to clock watch style with install it into the watchband (provided). Furthermore, the device will display clock’s time as priority, you can simply: button to switch over in the clock and interface display if you want when the Player Press the is in operation mode. button to wake up it If the Player is in dark screen mode (touch screen locked), press once the button again, or from dark and the touch screen is unlocked at the same time.
Products with the CE marking comply with the EMC Directive (2004/108/EC) and the Low Voltage Directive (2006/95/EC) issued by the Commission of the European Community. Hereby, STL Group BV, Ankerkade 20 NL 5928 PL Venlo, declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The declaration of conformity may be consulted at https://lencosupport.zendesk.com/forums/22413161-CE-Documents This product operates at 2400 - 2483.