Operation Manual

- 21 -
Note: If the disc is inserted upside down or if the disc
is badly scratched and unreadable, playback will not
be possible. In this case, the main display will show
NO DISC . Remove the disc and reinsert it properly,
or try another disc.
Note: If the disc is neither Music CD nor MP3 CD format, the unit might still read
the disc and start playback on a mute track. In this case, please remove the disc
from the unit .
6.) After successfully searching the disc, the display
shows:
CD Disc: Total number of tracks and total playing
time.
MP3 Disc: Total number of tracks and total number
of folder s
7.) Press Play/Pause Button to start playback. The display will show the elapsed
playing time of each track as it plays.
8.) Adjust the MAIN
VOLUME , BASS and TREBLE
level as desired.
9.) When the last track has played the player stops automatically. You may also
stop playback at any time by pressing the STOP /BAND button on the top
panel or on the remot e control.
10.) When you are finished listening, press the OPEN/CLOSE button on the front
panel or on the remote control to open the CD Door. Remove your disc and
press the
OPEN/CLOSE
button again to close the CD door.
11.) Press the STANDBY/ON button to return the system to the Standby (Power
Off) mode.