Operation Manual

- 31 -
8) Press the SKIP/TUNE or buttons to set the display to the desired turn - off
minute.
Note : If the turn-off time is equal to the turn-on time,
ERROR message shows on the display. Re- enter the
turn -off time after the
ERROR
message disappears.
9) Press the
TIMER
button again. The
TUNER
message begins flashing.
10) Press the SKIP/TUNE or buttons to select the Timer operating mode
between TUNER and CD .
11) Press the TIMER button again. The VOLUME
message begins flashing.
12) P ress the
SKIP/TUNE
or buttons to select the Timer operating volume.
13) Press the
TIMER
button again to save the whole
Timer setting. The saved setting will be shown on
the display. The Timer function will be activated
automatically. The
TIMER
indicator shows on the
display once the Timer function is activated.
14) At the selected On time, the system will turn on automatically to the function
selected; either TUNER or CD . The TIMER indicator remains in the display.
The unit will shut off automaticall y at the selected turn - off time.
Note:
If the system turns on to CD function it will only play until the end of the disc
and then stop.