User Manual

8
can select <10 sec>, <20 sec>, <30 sec>, <45 sec>, <60 sec>, <90 sec>,
<120 sec>, <180 sec> and <on>, Press SCAN/OK (12)” button to confirm
the duration time.
● If you do not want to save the settings, press the “MENU/INFO (11)”
button to cancel the settings.
7.5.3. On Level
● Press “ (13)” or “ (14)” button to select the <On level> from the
menu. Press SCAN/OK (12)” button to enter the On level sub-menu.
● Press “ (13)” or “ (14)” button to select the On level from the menu.
You can select <Medium>, <Low>, <High>, Press SCAN/OK (12)” button to
confirm the On level setting.
● If you do not want to save the settings, press the “MENU/INFO (11)”
button to cancel the settings.
7.5.4. DIM Level
● Press “ (13)” or “ (14)” button to select the <On level> from the
menu. Press SCAN/OK (12)” button to enter the On level sub-menu.
● Press “ (13)” or “ (14)” button to select the On level from the menu.
You can select <Medium>, <Low>, <High>, Press SCAN/OK (12)” button to
confirm the On level setting.
● If you do not want to save the settings, press the “MENU/INFO (11)”
button to cancel the settings.
7.6. Language
7.6.1. After entering System settings menu, Press “ (13)” or “ (14)”
button to select <Language> from the menu. Press SCAN/OK (12)”
button to enter the Language settings menu.
7.6.2. Press “ (13)” or “ (14)” button to select the language you want
and Press SCAN/OK (12)” button to confirm the language settings
● If you do not want to save the settings, press the “MENU/INFO (11)”
button to cancel the settings.
7.7. Factory Reset
In some circumstances the device needs to be reset to factory defaults
NOTE: All settings/presets will be lost when doing a factory reset.
7.7.1. After entering the System settings mode, Press “ (13)” or “ (14)”
button to select <Factory Reset> from the menu, Press SCAN/OK
(12)” button to enter sub-menu
7.7.2. Press “ (13)” or “ (14)” button to select <Yes> or <No> and
“MENU/INFO (11)” button to confirm the selection.
● The screen will show “All settings will be restored to factory defacuts! Are
you sure”, after select “Yes”, the device will reset and turn off.
● If you do not want to save the settings, press the “MENU/INFO (11)”
button to cancel the settings.
7.8. Software upgrade
NOTE: Software update can only be done if you have received an approved
update file from our service department. Upgrade with other software files
will make a Permanent damage to this apparatus.
7.9. SW version
7.9.1. After entering the System settings menu, Press “ (13)” or “ (14)”
button <Software version> from the menu. “MENU/INFO (11)”
button to display the Software version information.
7.9.2. Press “MENU/INFO (11)” button to return to previous menu.
8. How do use the DAB Radio
8.1. General functions
8.1.1. Switching On and Off
● Short press the “ (05)” button to power on the Lenco
PDR-045/PDR-046. Then Press “MODE (6)” button to select DAB mode.
Press “SCAN/OK (12)” button to enter sub-menu.
8.1.2. Adjusting the volume
● Press “ (07)” or “ (08)” button to adjust the volume.
The Display will show the volume bar
8.1.3. Speaker mute.
● In DAB radio listening mode, short press the “SCAN/OK (12)” button to
mute the speaker. The Display will show: < Volume Muted > for ~2
seconds, and a mute icon will show on the display.
● Short press the “SCAN/OK (12)” button again to resume the volume or
Press “ (07)” or “ (08)” button to adjust the volume again.
8.2. General Setting
In DAB mode, Press and hold the “MENU/INFO (11)” button to open the DAB
setting menu.
8.2.1. Station list
After the automatic station search, all radio stations will be stored in the
station list. You can store your favored DAB radio stations into presets
memory 1-30.
8.2.2. Full scan
● Press “ (13)” or “ (14)” button to select <Full scan> from the menu.
“SCAN/OK (12)” button to start the full scan.
The display will show: <scanning...> and automatically scans for available
DAB stations.
When the autoscan is finished you can repeatedly Press “ (13)” or “
(14)” button to find your desired radio station and select it by pressing the
“SCAN/OK (12)” button.
Then you can store your favorite station as a preset:
Press and hold the “PRESET(05)” button.
Press “ (13)” or “ (14)” button to select a storage location. You then
can select storage location (P1-P30) and press “SCAN/OK (12)” button to
store the station into the selected preset, “Preset saved” will appear on
screen.
Note: Press and hold preset button 1 – 5 to directly store current radio
station to preset 1 till 5