User manual

E-11
CLEANING THE UNIT
 To prevent fire or shock hazard, disconnect your unit from the AC power source
when cleaning.
 If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use any wax
or polish sprays on the cabinet.
 If the front panel becomes dirty or smudged with fingerprints it may be cleaned
with a soft cloth slightly dampened with a mild soap and water solution. Never use
abrasive cloths or polishes as these will damage the finish of your unit.
CAUTION: Never allow any water or other liquids to get inside the unit while cleaning.
TROUBLESHOOTING GUIDE
Symptom
Possible Problem
Solution
No Charging
AC Adaptor is not plugged
into a wall outlet or the
connector is not plugged
into the power supply jack
on the back of the unit.
Plug the AC adaptor into a wall outlet
and plug the connector into the
supply jack on the unit.
Wall outlet is not
functioning.
Plug another device into the same
outlet to confirm the outlet is working.
Main power switch on the
back of the unit set to OFF
position.
Set the main power switch to ON
position.
No Sound
Bluetooth speaker is not
linked with the cell phone.
Go through “Bluetooth Operation”
process to link the speakers.
Speaker placement out of
range.
Relocate the speaker within
Bluetooth operating range.
Volume set too low.
Press the Volume+ button to turn the
sound level up.
Cell phone will
not charge
The unit is in battery
operated mode.
Connect the AC adaptor to the unit
and set main power switch to the ON
position.
Cell phone is not
installed properly.
Remove your cell phone from the
charging cord and check for
obstruction on the connectors.
Cell phone is locked up or
frozen.
Cell phone battery has
problem.
Please make sure your cell phone is
working properly before plugging
into the unit. Please refer to your
cell phone manual for details.