For more information and support, please visit www.lenco.
TFT-1527 USER MANUAL BENUTZERHANDBUCH GEBRUIKSAANWIJZING For more information and support, please visit www.lenco.
TO THE CUSTOMER: Thank you for purchasing this LCD TV. When opening the box for the first time, please check whether all the accessories are present. Before connecting parts and power, please carefully read the user manual and always keep these instructions handy and close by your LCD TV. Safety precaution...................................................................................... 3 Warnings and Accessories.........................................................................
Safety precaution Notes: WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of insinuated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK). REFER SERVICING TO AUTHORISED SERVICE PERSONNEL.
Warnings and Accessories SAFETY WARNINGS Before using this product, read and follow all warnings and instructions. This product is not intended for use by young children. Young children should be properly supervised. This product is intended for household use only and not for commercial or industrial use. Do not expose to dripping or splashing. No naked flame sources, such as lighted candles, should be placed on the product. Allow suitable distances around the product for sufficient ventilation.
Remote control manual Aspect button /ASPECT AUDIO If there is light around the TV, the remote control may fail orwork abnormally. If long time not to use the remote, please remove the battery.
Remote control functions , ASPECT: select the picture display ratio:16:9/4:3/zoom.
LCD TV panel overview TV Control Panel 1.Volume adjusting. 2.Channel selecting. 3.Main menu display and confirm. 4.Selecting exterior signal input. 5.On/off button. TV Terminal connections RF(75 ) PC AUDIO R L VIDEO S-VIDEO SCART 1. Antenna input (75 Ohm VHF/UHF). 2. Headphone output. 3. PC audio input . 4. AV input . 5. S-VIDEO input . 6. SCART input/output terminal . 7. VGA input . 8. High definition multi media interface 9.
Connecting to external devices RCA terminal is used to connect the output device of DVD HDMI VIDEO/L/R DVD The rear of TV Left/right Camera Video recorder S-VIDEO RF(75 ) PC AUDIO R L VIDEO S-VIDEO SCART SCART VGA HDMI VGA HDMI AUDIO PC VGA DVD HDMI Notes: 1.VIDEO-L-R/S-VIDEO use a common Audio in. 2.VIDEO-L-R of DVD is corresponding to VIDEO-L-R of LCD TV. 3.SCARTto SCART from a DVD. 4.PC to VGA using PC AUDIO. 5.VIDEO-L-R from a DVD. 6.HDMI from a DVD.
OSD basic adjustment Picture Picture Picture Mode Normal Brightness Contrast CH Saturation Sharpness Hue Scale Move 16:9 Select MENU Exit 1. Press the "MENU" button to enter the OSD menu, Then press " / " button to select the "Picture" menu. 2. Press the" / "button to enter the "Picture"menu, Then press " / " button to select "Picture Mode"and press the " / " button to select the picture mode such as Normal/Soft/Vivid/User. 3.
Channel Channel Auto Tune Manual Tune Fine Tune Skip CH On Channel Swap Sound.SYS B/G MENU Channel 1 1 Channel 2 1 Swap Move Select Exit MENU 1. Press the "MENU" button to enter the OSD menu,Then press " / " button to select the "Channel" menu. 2. Press the " / " button to enter the "Channel" menu, Then press " / " button to select "Auto Tune" and press the " " button to enter Auto Tune adjustment menu to adjust automatic search and memorize into program list. 3.
Function Color Temp. User User - R User - G CH User - B 6. Move Select MENU Exit 7. 8. 9. Press the " / "button to select "User-G" and press th e " / " button to enter User-G adjustment menu to adjust G. Press the " / " button to select "User-B" and press th e " / " button to enter User-B adjustment menu to adjust B. Press " / " button to select "DNR" and press the" / " button to select the dynamic noise reduction mode such as Normal/Weak/Strong.
Teletext operation TTX/MIX: press TTX/MIX to enter teletext state and display teletext page if want to display image and teletext page at the same time. Press this button again. If want to exit teletext state. Press this button again. If want to exit teletext state. Press this button again. when teletext page is displayed on the screen. You can select relevant function by using the remote control. SUBPAGE: is refer to the subpage of teletext page, i.e subcode page. When it is pressed.
Trouble shooting Before contrast the service technician, perform the following simple checks. If any program still persists, unplug the LCD TV and calling for serving. PROBLEM POSSIBLE SOLUTION No sound and picture - Check that the main plug has been connected to a wall let. - Check that you have pressed the POWER button on the front of TV set. - Check the picture contrast and brightness settings. Normal picture but no sound - The remote control does not work Check the volume.
NOTE: There is a problem in VGA mode.(Only VGA mode applied) PROBLEM The signal is out of range. Vertical bar or stripe on back ground&Horizontal Noise&Incorrect position. Screen color is unstable or single color. POSSIBLE SOLUTION - Adjust resolution, horizontal frequency, or vertical frequency. - Check it whether the signal cable is connected or loose. - Check the input source. - Work the auto configure or adjust clock, phase, or H/V position. - Check the signal cable.
Specifications Panel Features Screen Size Active Area Aspect Ratio 15.6 inch 344.232 mm(H) X 193.536 mm(V) Panel Resolution Brightness 1366 X 768 250 cd/m² Contrast Ratio Viewing Angle 500:1 16:9 90º(H) X 65º (V) 0.252mm(H) X 0.252mm(V) Dot Pitch Maximum Colour 16.
