User manual

2. Charging the battery

• Make sure that the computer is turned on. Connect the player to

the computer by using the USB cable. Now the computer will detect

and install the driver automatically. Once the installation is

complete, the player will be displayed in “My Computer” or for MAC

users on the desktop.

Note: For Windows 98/98SE the driver needs to be installed first.

• Once connected to a computer the player will charge automatically.

After 2 ~ 3 hours the battery is fully charged. At same time, the

player is ready for media files upload / download with your

computer.

3. Turn ON/OFF player and use menu’s function

• Press and hold the button for 3 seconds to turn “ON” the player,

then you will see any one of the following shown Main Menu screen

“Bluetooth / Music / Movie / Record / Picture / Setup / eBook”

will appear on LCD after the Loading and Opening screen have

displayed.

• Select you desired menu function by using / , and M

button.

• Press M button to call up those submenus in different mode

functions.

• Press or pressing button for goes back to previous submenu and

main menu.

• Adjust the volume level by press or pressing the / button.

• To turn OFF the player, press and hold the button for 3 seconds.

For hearing protection; a display warning pop-up on TFT screen, or, a

beep warning will be heard from earphone when every time you

increase the volume level and reach to the default setting level which

may exceed 85dB. Press M button to accept the warning and

enter/continue into the volume control for increase the level and until