Installation and Operation Manual

16
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
CAUTION: Wear gloves during brick installation in case of
sharp edges inside the stove.
WARNING: IF THE BRICKS ARE NOT INSTALLED EXACTLY AS
SHOWN BELOW, THEY COULD FALL OUT OF PLACE DURING
REFUELING OR BURNING OF THE STOVE CAUSING SERIOUS
INJURY.
BRICK AND BAFFLE INSTALLATION
Firebox Brick Layout as
Viewed from the Front
Figure 19
Figure 20 - Baffle Boards Installed Figure 21 - Baffle Boards
18
19
20
8
7
6
5
4
3
2
1
9
10
11
12
17
16
15
13
14
All Brick are Full Size
9” Long x 4-1/2” Wide x
1-5/16” Thick
6.5
7.7
Back Baffle Board
Back Baffle Board
7.7”
6.5”
Front Baffle Board
Front Baffle Board
1. Install brick #1-20 in the numbered sequence shown in Figure 19.
2. Brick’s 13 and 14 will be located between the steel firebox and rear
baffle board (already installed).
3. Once all bricks are installed confirm that the already installed baffle
boards are in there correct location and resting on the secondary
burn tubes.