Printer User Manual

18 PB42 Portable Receipt Printer User’s Guide
Charging the Batteries
There are several ways to charge the PB42 batteries:
• Connect AC power to the printer and charge the batteries
while they are inside the PB42.
• Place the PB42 with batteries installed in the 4-bay charger
(Model AC10).
• Charge the batteries in the CK60/PB42 quad battery charger
(Model AC4).
For information on charging your batteries in the 4-bay charger,
see the PB42 4-Bay Charger Quick Start Guide (P/N 930-118-
001). For information on charging your batteries in the quad
battery charger, see the CK60/PB42 Quad Battery Charger Quick
Start Guide (P/N 962-000-044).
It takes about 4 hours to charge the batteries inside the PB42
with the power cord attached. To charge the batteries inside the
PB42, you need:
• an Intermec 12 VDC power supply (Model 073573).
• an AC power cord.
To charge the batteries inside the PB42
1 Install the batteries in the PB42. For help, see the previous
section, “Installing the Batteries.”
2 Connect the power supply to the DC power connector on the
printer.