® JUMBO DISPLAY AM / FM CLOCK RADIO MODEL CR-776 OPERATING INSTRUCTIONS EASY TO READ JUMBO CLOCK DISPLAY WAKE UP TO RADIO OR ALARM AM/FM RADIO RECEIVER ELECTRONIC DIGITAL CLOCK PM & AUTO INDICATORS SNOOZE FUNCTION SLEEP TO RADIO BATTERY BACK-UP (FOR EXTRA 9 MINUTES SLEEP) (WITH AUTOMATIC SHUTOFF) (9V BATTERY, NOT INCLUDED) PLEASE READ CAREFULLY BEFORE USE CR-776_031500 NL v.
SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash and arrow head within the triangle is a warning sign alerting you of dangerous voltage inside the product. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within the triangle is a warning sign alerting you of important instructions accompanying the product.
SAFETY INSTRUCTIONS 11. Power Cord Protection - Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenient receptacles, and the point where they exit from the appliance. 12. Cleaning - The appliance should be cleaned only as recommended by the manufacturer. 13.
LOCATION OF CONTROLS FRONT VIEW PM INDICATOR DIAL SCALE CLOCK DISPLAY TUNING CONTROL VOLUME CONTROL AUTO (ALARM) INDICATOR TOP VIEW DIMMER SWITCH FUNCTION SWITCH (ALARM/AUTO/OFF/ON) HOUR SET MINUTE SET SNOOZE BUTTON BUTTON BUTTON TIME SET BUTTON ALARM SET/ OFF BUTTON BAND SWITCH SLEEP BUTTON BACK VIEW BATTERY COMPARTMENT (9V, for back up) FM ANTENNA WIRE 3 AC POWER CORD CR-776_031500 NL v.
OPERATING INSTRUCTIONS Powering Up Plug the AC power cord into a 120V, 60Hz electrical outlet. The clock display will light up and flash indicating the power is on. NOTE: This cord is polarized. This means the cord will only fit one way into the socket or wall outlet. If it does not fit, do not force it, just reverse it and try again.
OPERATING INSTRUCTIONS Waking up to Radio 1. Set the alarm time as previously instructed. 2. Select your desired AM or FM broadcast by following the procedure of Playing the Radio. 3. Make sure the VOLUME control is set loud enough to wake you up. 4. Slide the FUNCTION switch to AUTO position and the AUTO lamp will light up. NOTE: Your set is now ready to turn on automatically at your selected alarm time. 5. When alarm sounds, to get 9 minutes of extra sleep, press the SNOOZE button. 6.
TROUBLE SHOOTING (Helpful Hints) SHOULD YOUR SET EXHIBIT A PROBLEM, CHECK THE FOLLOWING BEFORE SEEKING SERVICE. SYMPTOM Alarm does not come on in the morning. FM is distorted and weak. Noise or weak sound on AM broadcasts. CAUSE SOLUTION AM or PM not set correctly. Is alarm time set in AM range (PM Lamp off)? Advance the clock 12 hours. FUNCTION switch is in OFF position. Is the AUTO Lamp off? Set the FUNCTION switch to AUTO or ALARM position. FM antenna wire is not extended.
SPECIFICATIONS Power source: Dimensions: Frequency range: AC 120V, 60Hz, 8W DC 9V battery for backup time memory (optional, alkaline batteries are recommended) 9" (Length) 4 1/4" (High) 2 3/4" (Depth) FM 88 - 108MHz AM 530 - 1700kHz LIMITED WARRANTY We warrant this product to be free from defects in material and workmanship under normal use for a period of 90 days after purchase and we will repair it free of charge or replace it at no charge, should it become defective under this warranty, providing you