Smart Watch User Manual ID205L Thank you for purchasing our products. This manual addresses the safety guidelines, warranty, and operating instructions. Please review this manual thoroughly before operating your device.
Getting Started What's in the box Smart Walsh man Smart watch Charging cable User manual (ID205L with bands) What's in this document This manual gets you started quickly with selling up our walk. Setup ensures that your watch can synchronize ils data with the Profiteer app, where you can get detailed information on your stats, view historical trends, log sleep, and more. As soon as setup is complete, you're ready to start moving. The remainder of the manual walks you through every function on your ID205L.
When the walk shows that the battery is low, connect the watch to a USB port with 5-500mA. While the watch charges, there is a battery progress bar on the screen and you can press the function button to check the battery level. Remove the watch from the power supply once fully charged. ® USB charger requirement: DC USB port (5-500mA) e Charging time: 2-3 hours Disassembling / Assembling Your Watch Disassembly 1. To remove the wristbands, turn over the watch and find the quick-release lever. 2.
3. Repeat on the other side. Assembly 1. To reattach the wristbands, slide the pin (the side opposite the quick-release lever) into the notch on the watch. Attach the wristband with the clasp to the top of the watch. 2. While pressing the quick-release lever inward, slide the other end of the wristband info place. 3. When both ends of the pin are inserted, release the quick-release lever.
Wearing Your Watch All-day wear and exercise For all-day wear when you're not exercising, wear the device on your wrist horizontally, a finger’s width below your wrist bone and lying flat, the same way you would put on a watch. For optimized heart rats tracking, keep these dips in mind: 1. Experiment with wearing the watch higher on your wrist during exercise. Because the blood flow in your arm increases the farther up you go, moving the watch up a couple of inches can improve the heart rate signal.
lle el Te App Installation Use the watch with our customized Profiteer app. You can download Profiteer from Apple Store/Google Play or scan the QR codes below to download. Notes: * The Profiteer app is only compatible with smartphones, not tablets or PCs. ® Smartphone operating system should be 108 8.0 / Android 4.4 or higher; Bluetooth version should be 4.0 or higher. Smart Phone System Requirements ® iOS 8.0 & higher # Android 4.4 & higher ® Bluetooth 4.
App Interfaces Main page {Swipe down the page to sync data from the watch to your phone) al di opiate rds Al Fi ATT EARL # gt 2 een i Salyut $5 Mani Darn Li Paar Rae Cains Fa ary ode Su fares ei a ai User
Pairing the Watch with Your Phone Please paler the watch with your phone In the Profiteer app, NOT In the Bluetooth settings of your phone. Pair the watch with your Do NOT pair the watch smartphone In the Profiteer app || With your smartphone in your phone's Bluetooth settings Android (D Enable the Bluetooth of your smartphone. © Open the Profiteer app on your smartphone and go to the "Device" page, tap "Bind Device", then your smartphone stars searching devices.
Notes: » Once the watch is connected to your app, the watch will automatically search and reconnect itself if the connection is lost or when Bluetooth is restarted after manual disconnection. If the watch is unbound from the app, the information on the watch will be reset, and the information on the app will be cleared. Please do not unbind the connection unless there is an issue that will require a reset.
The home screen is the clock. On the clock: e Swipe down lo see notifications. @ Swipe up to see your daily stats. » Swipe left to see the function list. ® Swipe right to see the status bar. Notice bar Status bar Function list {automatic heart rate monitoring, wrist senses, do not disturb, find phone). Data bar fig. 1 After the watch is bound fo the app, the home screen will display the time and dale as shown in fig. 1.
Wake a Dimmed Screen To conserve power, the watch has a standby mode in which the screen tums off. To wake the screen, tum your wrist towards you or press the function button. Function Introduction 1. Heart rate fl Tracks your Tracks your Guides your Bet slams in the exercise data in up real-time hart brag thing for & app to have the to & spores modes. rate automatically relaxation. was vibrates to Chooses the modes and continuous wake you up, that you want to take pills, and display on the mots.
During sports = Swipe the screen left/right to flip through exercise data. ® Press the right key to pause/resume the sport. End the sport Press and hold the right button to end the sport — Tap "V" to confirm. Exercise data is displayed after the exercise has ended. Swipe down the screen fo flip through exercise data: Data of exercises less than 1 minute will not be saved.
2. Monitoring Heart Rate The watch tracks your real-time heart rate automatically and continuously. You can also view your detailed heart rate data on the watch screen or in the app. yr Motes: » To monitor heart rate more accurately, wear the watch on the upper position of your wrist and a bit tighter than usual when you exercise. In addition, complete your profile in the app. » Automatic heart rate monitoring is ON by default, monitoring heart rate all day automatically.
4. Setting Alarms 1) Go to the "Device" page in the app and tap "Alarm Alert”. 2) Tap to add an alarm. 3} Tap the alarm, then set the alarm type, repeat type and time. 4) Tap ™V" to save your settings. You can tap the alarm you set on the watch screen to enable / disable the alarm. 5. Controlling Phone Music 1} Go lo the "Device" page in the app and tap "Music Control®. 2) Enable the function and tap "V" to save your settings.
Notes: e Only when "Call alert” is enabled in the app ("Device” page — *Call Alert") will calls be notified. (After enabling/disabling the Call Alert function, tap "V" to save your settings.) e When "Do not disturb” is enabled in the app {"Device” page — "More" — "Do not disturb”), calls will not be notified on the watch during the do-not-disturb period. 7.
Noe: You can use the find phone function only when it is enabled in the app. Basic Specifications Mode! No.: ID20SL Sync: Bluetooth 4.2 Screen: 1.3" TFT LCD Battery Capacity: 210maAh Working Voltage: 3.8V Working Temperature: -107C to 40°C Weight: 1.
© Failure to find the watch when pairing 1. Make sure your smartphone’s Bluetooth is enabled and your smartphone's system meets the requirements of Android 4.4 or higher, iOS 8.0 or higher, and Bluetooth 4.0 or higher. 2. Make sure the distance between your smartphone and the watch does not exceed 0.5 meters and that Bluetooth communication is also within range (10 meters max). 3. Make sure your watch has enough battery life. If there is still a problem after being fully charged, please contact us.
To reconnect the walk fo your smartphone, please kindly take the following steps: 1. Go to your smartphone system Settings, find the Profiteer app and enable the Location and all Notifications. 2. Clear all running / background processes on your smartphone. Go to the Profiteer app and swipe down "Mainspring, then the watch will reconnect to your smartphone and update data. You can also restart your smartphone and Bluetooth, then rebind the watch in the app.
Warranty We strive to build our products with the highest attention to detail and craftsmanship. However, sometimes there are occurrences of a defect, so we are happy to offer a ONE-year hassle-free warranty on all our devices as we continue to make amazing products. Please contact us if you have any questions about our devices. Important Safety Instructions The device contains electrical equipment that may cause injury if not used properly.
e Do not use your device in a sauna or steam room. « Dispose of this device, the device's battery and its package in accordance with local regulations. ® Do not check any notifications, GPS, or any information on your device's display while driving or in other situations where distractions could cause injury or hazard. Always be aware of your surroundings while exercising. Battery Warnings A lithium-ion battery is used in this device.
inherent limitations with the technology that may cause some of the heart rate readings to be inaccurate under certain circumstances, including the user's physical characteristics, fit of the device, and type and intensity of activity e The smart watch relies on sensors that track your movements and other metrics.