Specifications

Reassemble your lock
using the Level bezels.
Using the Level bezels, thread the tailpiece
through the middle hole and screw the two sides
loosely together with the provided bezel screws.
04
Activate your Level Lock.
Unscrew the cap on the end of the bolt and insert the battery
with the flat (negative) end towards the cap. When you screw
it back in, you’ll hear a welcome chirp.
Download the Level Home app for iOS or Android, create an
account, and connect to your lock.
Scan the QR code on the back to enable HomeKit.
05
Install your Level Lock
and strike plate.
A. Insert the bolt into your door with the word
TOP facing up. Look through the borehole—if you
can see the end of the bolt sticking out, you’re
good to go.
B. If you can’t, simply take it out of your door and
use a screwdriver to extend the bolt. Ensure the
bolt snaps into place and put it back in your door,
the word TOP facing up.
C. Fasten the bolt with the provided bolt screws.
D. Slide on the motor and make absolutely sure to
tighten the connecting screw.
E. Fasten the strike plate to your door jamb with
the provided strike plate screws.
03
Test your deadbolt.
Make sure your current deadbolt throws smoothly
without pushing or pulling the door.
01
Disassemble your lock and keep pieces.
Unscrew the lock housing, the deadbolt, and the strike
plate. Store the deadbolt and strike plate in the Level box.
02
Support 7 days a week. Visit www.level.co/support for additional help.
2-year limited warranty. Visit www.level.co/warranty for more information.
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. For more
information on FCC compliance, please go to www.level.co/FCC
Although the Level Lock Bolt Edition is built to ANSI specifications,
it is not an ANSI or BHMA certified door lock. You are responsible for
proper installation of the Level Lock and its use with a compatible
American standard deadbolt that is operating in good condition.
You assume all risk and responsibility in relation to the installation
and performance of the lock and any third party components and
services used in relation to the lock.
Please follow these suggestions and safeguards to decrease the
chances of damage to your Level Lock and to lessen the risk of harm
or injury:
- Use the lock for its intended purposes only.
- Keep body parts away from the lock during operation to avoid injury.
- Do not crush, perforate, drop, throw, or try to deform the lock
or battery.
- Do not short external contacts or circuits, expose your lock
or battery to water, liquids, or open flames or lit substances, or
dispose of them in fire, solvents, or water.
- Do not use the lock or battery if they aren’t working properly or have
been damaged or cracked.
- Dispose of the lock and battery in accordance with local
requirements.
- Do not charge CR2 lithium batteries.
Battery life varies with usage.
Caution: This product comes with small parts and parts with sharp
edges that may cause injury or create a choking hazard. To avoid injury
or damage, keep away from children.
Revision 1.0
To enable HomeKit, scan this code during
the installation steps in the Level app:
Latch Bezel
Bolt
Key Bezel
CR2 Battery
Long Cap
2 Strike Plate screws
2 Bolt screws
Strike Plate
2 Keys
What you need:
Phillips Screwdriver
Compatible iOS or Android Phone