Switch User's Manual

Then, use screws provided with the equipment rack to mount each

switch in the rack.

Figure 3. Mount the Switch in the rack

Connecting Network Cable

GSW-1675T supports 1000Mbps Gigabit Ethernet that runs in Auto-

negotiation mode and 10Mbps Ethernet or 100Mbps Fast Ethernet that

runs both in half and full duplex mode and 1000Mbps Gigabit

Ethernet runs in full duplex mode using four pair of Category 5 Cable.

These RJ-45 ports are Auto-MDI type port. The Switch can auto

transform to MDI-II or MDI-X type, so you can just make an easy

connection that without worrying if you are using a standard or

crossover RJ45 cable.

There are additional 2 ports mini-GBIC slot for optional mini-GBIC

module.

AC Power

GSW-1675T used the AC power supply 100-240V AC, 50-60 Hz. The

power switch is located at the rear of the unit adjacent to the AC

power connector and the system fan. The switch’s power supply will

adjust to the local power source automatically and may be turned on

without having any or all LAN segment cables connected.