Switch User's Manual

Device Setting

You can set the device by using the function key in the Device Setting

Dialog box.

Configuration Setting: In this Configuration Setting, you can set the

IP Address, Subnet Mask, Gateway, Set Trap to (Trap IP Address),

System name and Location.

Select the device in the Discovery list or Monitor List and press this

button, then the Configuration Setting window will pop out as Figure

10, after filling up the data that you want to change, you must fill up

the password and press the “Set” to process the data changed

immediately. The default password of this 16-Port 10/100/1000Mbps

Gigabit Ethernet Web Smart Switch configuration is “admin”.

Figure 10. Configuration Setting