User manual

WEP is a basic encryption method, which is not as secure as WPA. To use WEP,

you will need to select a default transmit key and a level of WEP encryption,

z Authentication type – Select “Open System” to communicate the key

across the network. Select “Share Key” to limit communication to only

those devices that share the same WEP settings.

z Shared keys input type – Select HEX or ASCII depends on your

preference

z Key table – You can input 4 different WEP encryption keys into the table

and by choosing the radio button to decide which one is valid now. The AP

supports 64, 128 and 152bit key length. The longer key we choose usually

means the encryption is stronger.

After all changes are made, be sure to click on “Apply” to make sure all

changes are saved into system.