User manual

Connection Status -

z Connection – This column show current connection status. If AP already

connect to an Access Point or station, here will show the MAC address of

the associated Access Point or station. Otherwise, connection column will

show “N/A” which means no connection to any Access Point or station.

z Network Type – Here indicates the Access Point works in AP mode or

Client mode (Infrastructure mode / Ad Hoc mode)

z SSID – SSID column displays current SSID assigned to the AP

z BSSID – This column displays the MAC address of the connected device.

z Wireless Mode – Here show the Access Point current work in either 11b

or 11g mode

z Current Channel – This column indicates the radio channel currently in

use.

z Security – Here indicates AP security settings in client mode. Should be

either “Disabled”, “WEP” or ‘WPA-PSK”.

z Rx Data Rate(Mbps) –show the current Rx Data rate status

z Tx Data Rate(Mbps) –show the current Tx Data rate status

z Current noise level –This column shows current link quality with AP by

noise level in 0 to -96 dBm scale.

z Signal strength – This column shows current link quality with AP by

signal strength in 0 to -96 dBm scale.

z Activity (Packets Rx) –show the current Rx packets

z Activity (Packets Tx) –show the current Rx packets