User manual

Wireless Network -

z Network Mode – You can set the wireless client into 2 different modes by

clicking radio button. Wireless Client (Infrastructure) act as an AP client

while Ad-hoc can support peer to peer network. Both Infrastructure and

Ad-hoc can support up to 108M SuperG transmission.

z Wireless Mode - Default setting is “2.4GHz 54Mbps (802.11g)”. This

will support all 802.11b/g clients connect to the AP. You can choose

“2.4GHz 11Mbps (802.11b)” in wireless mode column if your

environment only have 802.11b clients. The final selection “2.4GHz

108Mbps (802.11 SuperG)” supports high speed 108Mbps SuperG

function. In order to support SuperG 108M transmission, all wireless clients

will need to be AtherosP

solution.

z SSID - The SSID is the unique name shared among all points in a wireless

network. The SSID must be identical for all points in the wireless network.

It is case-sensitive and must not exceed 32 alphanumeric characters,

which may be any keyboard character. You can choose “Attach to any

available SSID”; system will determine the Access Point currently

available and establish connection with that Access Point. If you already

understand your wireless environment well, you can type in the SSID in

“Specify the static SSID” manually.

At Wireless Network page you can find a “Site Survey” button as shown above.

You can easily click on the “Site Survey” to find all wireless networks available

in your current environment.