User manual
46
Appendix B: Specification
Standard support IEEE802.11b
IEEE802.11g
IEEE802.3
IEEE802.3u
Interface Wireless IEEE802.11b/g
One 10/100 RJ-45 port
SDRAM 8Mbyte
Flash 2Mbyte
Max. Bandwidth
Ethernet
Wireless
Full Duplex: 200Mbps (for 100BASETX), 20Mbps (for 10BaseT)
Half Duplex: 100Mbps (for 100BaseTX), 10Mbps (for 10BaseT)
1, 2, 5.5, 6, 9, 11, 12, 24, 36, 48, 54, 108Mbps Auto Fall-Back
Wireless Setting − Operation Mode – AP / Wireless Client / Repeater / Wireless
Bridge Point to Point and Point to Multi-Point Mode
− SSID
− Channel Selection
− Transmission Rate (Best, 108, 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5,
2, 1) in Mbps
− Transmit power (Full, Half, Quarter, Eighth, Minimum)
− Beacon Interval (20-1000): 100
− Data Beacon Rate (DTIM (1-16384): 1
− Fragment Length (256-2346): 2346
− RTS Threshold (256-2346): 2346
− Short Preamble: Enable
− Allow 2.4GHz 54Mbps Station Only
− Protection Mode: Auto / Enable / Disable
− eXtended Range
− Distance
Wireless Security WEP setting
− Authentication type: Open System / Shared Key
− Shared keys input type: HEX / ASCII
− Shared keys length: (64-bit, 128-bit, 152-bit)
− Default WEP Key to use (1-4)
WPA-PSK setting