Cut Sheet

FEATURES
• Allows for ANSI/TIA-568-C compliant cabling design
• Provides the ability to create a testable permanent link for
cabling that terminates in the wall without the use of a
traditional wallplate
• Createsaxedlocationfortheconnectoraftertermination,
reducing the potential for damage prior to device installation
• Provides ability to test and warrant the cabling using the same
equipment and process as any other work area outlet connector
• Availableasasetof5brackets,orindividuallykittedwitha
single-gang low-voltage Leviton Wallplate Mounting Bracket
DESIGN CONSIDERATIONS
• Bracket is designed to mount in standard NEMA electrical device
opening with 3-9/32 inch [83.34 mm] hole spacing
• #8/32 mounting screws included with each bracket
• Toensurepropercablebendradius,a4"x4"boxwithreducerring
isrecommended;considerusinga5"x5"boxforCat6Acabling
• LevitonHigh-FlexHD6patchcords(6H460-xxx)havea
0.15"OD,resultinginasmallerminimumbendradius,
and are available in multiple lengths starting at 6 inches.
PHYSICAL SPECIFICATIONS
Dimensions:seepagetwo
Materials: 16-gaugegalvanizedsteel(In-WallBracket)
 22-gaugegalvanizedsteel(WallplateMountingBracket)
STANDARDS COMPLIANCE
ANSI/TIA-568-C compliant
COUNTRY OF ORIGIN
Mexico
WARRANTY INFORMATION
ForacopyofLevitonproductwarranties,visit
www.leviton.com/warranty
APPLICATION
The QuickPort In-Wall Bracket provides the ability
to create a testable permanent link for cabling that
terminates in the wall without the use of a traditional
wallplate. It is ideal for Ethernet-enabled devices that
mounttoelectrical/low-voltageboxesordirectlytothe
wallsurface,suchasWAPs,cameras,orclocks.The
bracket provides a stable mounting surface for the
connector that is recessed behind the wall. It allows
for a cabling design that is ANSI/TIA-568-C compliant.
Deviceconnectionsfromtherecessedconnectorare
easilymadewithLevitonHigh-FlexHD6patchcords.
PRODUCT SPECIFICATIONS
49223-BA5, 49223-BAK
QuickPort
®
In-Wall Bracket
forusewithNEMA-styleelectrical/low-voltageboxesandmudrings
49223-BA5, 49223-BAK
Page1of2
Leviton Network Solutions
2222 - 222nd St. SE
Bothell,WA98021-4416
tel1-800-824-3005
tel[phone]
[e-mail]
www.leviton.com
Asia / Pacic
T +1.631.812.6228
E [e-mail]
Canada
T+1.514.954.1840
E [e-mail]
Caribbean
T +1.954.593.1896
E [e-mail]
China
T +852.2774.9876
E [e-mail]
Colombia
T +57.1.743.6045
E [e-mail]
Europe
T+33.6.8869.1380
E [e-mail]
India / SAARC
T +971.4.886.4722
E [e-mail]
Mexico
T +52.55.5082.1040
E [e-mail]
Middle East & Africa
T+971.4.886.4722
E [e-mail]
South Korea
T +82.2.3273.9963
E [e-mail]
Copyright©2015LevitonManufacturingCo.,Inc.Allrightsreserved.Subjecttochangewithoutnotice.
ReleasedMarch2015
SPECIFICATION
Bracket shall provide the ability to create a testable
permanent link for cabling that terminates in the wall
without the use of a traditional wallplate. It shall provide
axedlocationfortheconnectoraftertermination,
reducing the potential for damage prior to device
installation. Bracket shall be compatible with standard
NEMAelectricalboxesandringshavingadevice
mounting hole spacing of 3-9/32 inches. Ethernet-
enabled devices shall be able to mount to the NEMA
opening even with the adapter in place.
49223-BA5
QuickPortIn-WallBrackets(setofve)
49223-BAK
QuickPort In-Wall Bracket Kit
(includesoneIn-WallBracketand
oneWallplateMountingBracket)