User Manual

5
If there is no interaction with the VSC for more than 20 seconds, the menu will be exited and
the display will revert back to the source setting. You can also manually exit from the Zone
Menu by pressing and holding the src button for 2 seconds.
 Press and release the src button to advance to the next menu item.
 Press the Power button to go back to the previous menu item.
 Press the + button to adjust the current item.
 Press the – button to adjust the current item.
Setting Zone Balance Level
The Balance setting allows you to change the balance levels for the left and right speakers in
the respective audio zone. To change the balance level setting, press the + button (1 to 10) to
attenuate the left channel. Press the – button (-1 to -10) to attenuate the right channel.
After modifying the Balance setting, press and release the src button to advance to the Bass
menu item.
Setting Zone Bass Level
The Bass setting allows you to change the bass level for the respective audio zone. To change
the bass level setting, press the + button (1 to 10) to increase the bass level and press the –
button (-1 to -10) to decrease the bass level. The bass level can range from -10 to 10.
After modifying the Bass setting, press and release the src button to advance to the Treble
menu item.
Setting Zone Treble Level
The Treble setting allows you to change the treble level for the respective audio zone. To
change the treble level setting, press the + button (1 to 10) to increase the treble level and
press the – button (-1 to -10) to decrease the treble level. The treble level can range from -10
to 10.
After modifying the Treble setting, press and release the src button to advance to the
Loudness menu item.
Setting Zone Loudness
The Loudness setting allows you to increase or decrease the intensity of the audio output for
the respective audio zone. To change the loudness level setting, press the + button to enable
the loudness level and press the – button to disable the loudness level.
After modifying the Loudness setting, press and release the src button to advance to the
Brightness menu item.
WEB VERSION