Submittal Sheet

PRODUCT SPECIFICATIONS
THE LEVITON LOAD CENTER
Leviton Mfg. Co., Inc.
201 North Service Road, Melville, NY 11747 Tech Line: 1-800-824-3005 Fax: [phone] www.leviton.com
© 2020 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
FEATURES AND BENEFITS
• In compliance with standards UL 67, UL 50,
UL 50E, UL869A, EUSERC - SEC. 300, NEMA
type 3R
• Semi flush, Underground feed/Overhead
feed capable
2
• 5th jaw accessory available at 9 o’clock or
6 o’clock position
• Factory installed main breaker in main
breaker catalogs
• Solar-ready for future installations
• Provision for two field-install CTs
• Powder coated
• Tin Plated Copper bussing on all models
for superior quality and conductivity
• Up to 225A bussing for solar
photovoltaic (PV) backfeed
Combination Service
Entrance Devices
Solar-Ready, Semi flush,
Ring Type
APPLICATION
Leviton’s Solar-Ready Meter-Load Center Combination
Panels, also called “All-in-Ones”, are Electric Utility Service
Equipment Requirements Committee (EUSERC) and
California Title 24
1
compliant.
The panels feature an award-winning installation design
that makes them the ideal solution for integrating
alternative energy sources into any residential system.
THE LEVITON LOAD CENTER ADVANTAGE
Easy Installation
Allows for all wiring at rough-in
3
, without any circuit breakers
present. Our all plug-on design increases eciency and
provides room for hands to move and work freely.
Safer
The only GFCI circuit breaker on the market that exceeds
UL requirements
4
for ground-fault protection, helping to
ensure the safety of residents. Other load centers may
allow users to reset GFCI circuit breakers leaving them with
unprotected power.
Optional Smart
Wi-Fi
®
or Ethernet connection options for remote monitoring,
tripping and firmware updates for each circuit in the home.
1
California Title 24, Section 110.10
2
OH Service Application requires the use of the applicable Overhead Tunnel Kit
3
For applications up to 60A when using copper wire; or 50A when using
aluminum wire
4
The UL943 standard exempts GFCI circuit breakers from detecting and warning
when the trip solenoid and/or switching semiconductor fails in the “open” state,
rendering the GFCI circuit breaker incapable of tripping in response to a fault
condition, resulting in complete loss of GFCI protection.