Specification

ManualsBrandsLeviton ManualsElectricalDecora Commercial Grade Passive Infrared Single-Pole 2100 sq. ft. 180-Degree Occupancy Sensor, Light Almond

PRODUCT DATA

ODS15-ID

Leviton Mfg. Co., Inc. Lighting & Energy Solutions

201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les

ODS15

Decora

Wall Switch PIR Occupancy

Sensor with Self-Adaptive Technology

BASIC OPERATION

The ODS15-ID uses passive infrared (PIR) detec-

tion technology to monitor a room for occupancy

through a segmented Fresnel lens. This special-

ized lens divides the field-of-view into sensor

zones. When a person passes into or out of a

sensor zone, the sensor detects motion and

switches the lights ON. The lights will remain ON

as long as there is an occupant moving through

the sensor zones.

A delayed-OFF time adjustment prevents the

lights from switching OFF when the space is

occupied. In order to keep the lights ON, a person

must pass through a sensor zone at least once

during the selected delayed-OFF time interval. An

LED indicator blinks each time the unit detects

activity in the sensor zones. When the space

being monitored by the sensor is unoccupied for

the length of time chosen as the delayed-OFF

interval, the unit will beep 3 times. Ten seconds

after the last warning beep, the unit will switch

the lights OFF.

APPLICATIONS

Leviton’s Cat. No. ODS15-ID Wall Switch Passive

Infrared (PIR) Occupancy Sensor is used to provide

automatic lighting control for energy savings and

convenience in a variety of commercial applica-

tions, including:

• Small offices • Heavier loads

• Private Restrooms • Lounges

• Storage areas • Classrooms

• Conference rooms

The ODS15-ID can be used for automatic switching

of incandescent lamps and low-voltage lighting

with electronic and magnetic ballasts. The unit

also features a manual override switch that can

be used to keep lights OFF while an area is occu-

pied, which may be desired in conference rooms

and other areas during slide or film presentations.

The unit installs in place of a single-pole wall

switch and fits in a standard wall box. The unit

requires a ground connection.

Summary of content (4 pages)

PAGE 1
PRODUCT DATA Decora® Wall Switch PIR Occupancy Sensor with Self-Adaptive Technology BASIC OPERATION The ODS15-ID uses passive infrared (PIR) detection technology to monitor a room for occupancy through a segmented Fresnel lens. This specialized lens divides the field-of-view into sensor zones. When a person passes into or out of a sensor zone, the sensor detects motion and switches the lights ON. The lights will remain ON as long as there is an occupant moving through the sensor zones.
PAGE 2
ODS15 PRODUCT DATA FEATURES • Fits in standard wallbox and replaces single-pole wall switch; ground connection required. Gangable with other units. • Low-profile design eliminates obtrusive “scanningdevice” look. Elegant Decora wallplates complement any interior for sleek aesthetics; uses Decora wallplates and coordinates with Leviton’s popular line of Decora wiring devices.
PAGE 3
DIMENSIONAL DIAGRAMS 1.75 (44.4 mm) 1.30 (33.0 mm) 0.48 (12.6 mm) MountingYoke 1.35 (34.4 mm) Patented B linders 2.60 (66.2 mm) 4.06 (103.2 mm) 2.61 (66.
PAGE 4
PRODUCT DATA INSTALLATION The ODS15-ID is preset to deliver optimum performance in a wide variety of applications without requiring any adjustments during installation. Exclusive self-adjusting operating features will automatically compensate for real-time occupancy patterns to provide maximum convenience and energy savings. The unit may replace a single-pole wall switch mounted in a standard wallbox. The unit must be properly grounded in order to operate.