Specification

PRODUCT DATA
OSWHB-I0W
Passive Infrared Aisle (High Bay)
Occupancy Sensor
BASIC OPERATION
Specifically designed for long, relatively narrow spaces
such as warehouse aisle and corridors, the OSWHB-
I0W Occupancy Sensor provides long range and high
sensitivity.
The OSWHB-I0W Occupancy Sensor is a “high bay” lens.
This lens provides coverage up to 55 ft. when mounted
20 ft. above the floor. Can be mount ed lower if needed.
The mount ing base, pro vid ed with the sensor, allows
quick and easy mount ing in cor ners, on walls or on
ceilings. The most common applications are factory
storage areas, warehouse aisles and corridors.
APPLICATIONS
• Cafeterias • Hallways • Loading docks
• Parking garages • Stairwells • Storage rooms
• Warehouses • Workspaces
FEATURES
• Fast, Sim ple Installation: Easy base mount, three wire
connection (low voltage) and twist-and-lock detector
attachment.
• Self-Adjusting: Internal microprocessor con tin u al ly
analyzes, evaluates and adjusts the infrared sen si-
tiv i ty and time delay. Per for mance is kept at a max i-
mum and user com plaints are eliminated.
• Flexible Base Mounting: Supplied twist-and-lock base
mount permits fast alignment. Supplied cover hides
mounting hardware and wires. Can be used with
raceways for hard surface installations. Adjustable
canopy for wall or ceiling mount.
• Range & Coverage: Up to 55 ft. for gross body
motion or forklift. Max. 7 feet wide.
• Multi-element, high bay lens for mounting up to 30
feet.
• Power base (OPB15) available for line voltage appli-
cations.
• Ambient Light Recognition: A Light Sensor prevents
lights from turning on when the room is adequately
lit by natural light.
• Non-Volatile Memory: Learned and ad just ed settings
saved in protected memory are not lost during power
outages.
• Timer Setting Feature: Automatic – 30sec – 30min.
Test mode – 6sec with auto exit programming.
• Walk-Through: Provides increased energy savings by
decreasing the time delay to 2.5min when someone
momentarily walks through the monitored space.
• High Motion Sensitivity: Large lens area and multi-ele-
ment lens design gives excellent range and sensitivity.
• Custom off-white color matched for shaded ceiling/
corner spaces and most common ceiling tiles.
• Uses OSPxx Series Power Pack: Uses Class 2, 24 volt
wiring, three wire connection (low voltage). Multiple
sensors can control single or multiple power packs.
• Device: High-impact housing and in jec tion molded
plastic. Color coded wire leads are 6” long (16.24 cm).
• Infrared Sensing: High sensitivity 9.8 micron detector
dual element.
Timer Left In Test Mode - The
sensor remains in an 6 sec.
test mode.
False-On - The sensor
incorrectly turns the lights on.
False-O - The sensor
incorrectly turns the lights o.
An installer accidentally leaves
the sensor in the 6 sec. timer
test mode and the lights may go
o or on every 6 sec.
The sensor detects movement
in the corridor or hall way and
the room lights turn on.
The sensor does not detect
movement because an
occupant sits virtually
motionless at a desk and the
lights turn o.
The sensor automatically resets the timer
to 10 min . after 15 min of test mode.
After an initial movement is sensed,
if another mov ement is not sensed within
the timer setting then the delayed o time
setting is automatically reduced.
Condition Example Self-Adaptive Reaction
If motion is sensed within a short period after
the lights go o, then the current delayed
o-time setting is increased.
How THe oSwHb-i AuTomATicAlly AdApTS
Leviton Mfg. Co., Inc. Lighting & Energy Solutions
201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: [phone] www.leviton.com/les
© 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.