U S ER M ANUAL Smart Ultrasonic Cool Mist Humidifier Model: Classic 200S Questions or Concerns? Please contact us Mon–Fri, 9:00 am–5:00 pm PST/PDT at support@levoit.com or at (888) 726-8520.
Package Contents Table of Contents Package Contents Specifications Safety Information • General Safety • Plug & Cord Getting to Know Your Smart Humidifier Getting Started • Filling & Refilling VeSync App Setup Using Your Smart Humidifier • Auto Mode • VeSync App Features • Important Tips • Using the Aroma Box • Preventing Leaks Care & Maintenance • Cleaning • Cleaning the Aroma Pad • Reassembling • Storing Troubleshooting VeSync App Troubleshooting Warranty Information Customer Support 2 2 3 3 4 5 6 6 8 9
READ AND SAVE THESE INSTRUCTIONS S A F E T Y I N F O R M AT I O N To reduce the risk of fire, electric shock, or other injury, follow all instructions and safety guidelines. General Safety • Only use the humidifier as described in this manual. • Do not use other items as replacement parts for this product. • Place the humidifier and cord so that it will not be knocked over. Do not place near large pieces of furniture or in hightraffic areas. • Do not cover the nozzles while the humidifier is on.
SAFETY INFORMATION (CONT.) Plug & Cord 4 • Ensure that the plug fits properly into a polarized socket. • Do not handle the power cord or plug with wet hands. Keep the plug and power cord away from liquids. • Your humidifier has a polarized plug (one prong is wider than the other), which fits into a polarized outlet only one way. This is a safety feature to reduce the risk of electric shock. If the plug does not fit, reverse the plug. If it still does not fit, do not use the plug in that outlet.
G E T T I N G TO K N O W YO U R S M A R T H U M I D I F I E R A. Nozzles J. B. Nozzle Cover K. Insulation Ring T. Water Tank Cap C. Water Tank Handle L. Transducer U. Silicone Sealing Ring D. Mist Outlet M. Float Housing V. Water Valve E. Water Tank N. Float W. Noise Silencer F. Cleaning Brush O. Mist Tube X. Humidity Sensor G. Cleaning Brush Storage P. Water Tank Windows Y. Aroma Pad H. Base Q. Air Outlet Z. Aroma Box R. Base Chamber AA. Air Inlet I.
G E T T I N G S TA R T E D 1. Filling & Refilling 1. Remove all packaging. 2. Choose a hard, flat location for the humidifier at least 12 in / 30 cm away from any walls. The surface must be water-resistant. [Figure 1.1] Remove the nozzle cover from the water tank. Use the handle to lift the water tank from the base. [Figure 1.3] 12 in / 30 cm 12 in / 30 cm Figure 1.1 3. Mist should be directed away from walls, furniture, bedding, and appliances. [Figure 1.2] Figure 1.3 2.
Filling & Refilling (cont.) 3. Fill the tank with room-temperature water. [Figure 1.5] Do not fill with hot water. CAUTION • Do not add water directly into the base chamber. [Figure 1.6] Note: We recommend using purified or distilled water to fill the tank. Figure 1.6 • Do not add water through the mist tube. • Do not add essential oils into the humidifier. [Figure 1.7] Only add essential oils to the aroma pad. [Figure 1.8] Figure 1.5 4. Replace the water tank cap and align the arrow with the lock.
Filling & Refilling (cont.) VESYNC APP SETUP 5. Place the tank back on the base and replace the nozzle cover onto the water tank. [Figure 1.10] Note: Due to ongoing updates and improvements, the VeSync app may be slightly different than shown in the manual. In case of any differences, follow the in-app instructions. 1. To download the VeSync app, scan the QR code or search “VeSync” in the Apple App Store® or Google Play Store. [Figure 2.1] Note: For Android™ users, choose “Allow” to use VeSync. 2.
U S I N G YO U R S M A R T H U M I D I F I E R Note: Using the VeSync app allows you to control your smart humidifier remotely and access additional functions and features (see page 11). 1. Plug in the humidifier. 2. Tap to turn your humidifier on. Tap repeatedly to cycle through mist settings: Auto Mode, Low, Medium, High, and Off. [Figure 3.1] Note: For more information on Auto Mode, see page 10. 3. Rotate the nozzles to adjust the direction of the mist. [Figure 3.2] Figure 3.1 4.
Button Color Button Button Color Function Green Low mist setting is selected Cyan Medium mist setting is selected Blue High mist setting is selected White Auto Mode is selected Red No water in tank or tank not on base Humidifier is off Off Display lights have been turned off White (Flashing) White Humidifier is in WiFi pairing mode Humidifier has been paired with WiFi Humidifier is off Off Display lights have been turned off Humidifier is not connected to WiFi Note: • Tap • to turn off th
VeSync App Functions The VeSync app allows you to access additional smart functions, including those listed below. Remote Control • Cycle through mist levels and turn on Auto Mode from your phone. • Turn display lights on/off from your phone. • Customize Auto Mode settings like target humidity and auto-off. Monitor Humidity Levels • Check current humidity levels in the humidifier’s environment. Set Timers and Schedules • Program individual timers or create a schedule for your smart humidifier.
Important Tips Your humidifier must have the correct level of water in the base chamber to work properly. If there is too much water in the base chamber, the humidifier cannot create mist. • Never pour water directly into the base chamber. Only add water to the water tank. [Figure 3.4] The humidifier will automatically release the correct amount of water into the base chamber. • Avoid moving or shaking the humidifier. [Figure 3.
Using the Aroma Box Preventing Leaks Your humidifier can be used for aromatherapy. The water tank may leak if not placed properly. 1. Push the aroma box at the back of the base and pull it out. [Figure 3.7] • Make sure the silicone sealing ring around the water tank cap is secured at all times. • Twist and secure the cap tightly onto the water tank. Make sure the arrow is aligned with the lock. [Figure 3.9] Figure 3.7 2. Put 2–3 drops of essential oil on the aroma pad. [Figure 3.8] Figure 3.
CARE & MAINTENANCE Note: • All maintenance should be done on a waterresistant surface, such as a kitchen counter. • Change the water daily to avoid bacteria growth. • Use a tissue or cloth to clean the nozzles regularly. • If not using the humidifier for 1 week or longer, do not leave water inside. Clean and dry the humidifier instead. 3. Remove the water tank from the base. Pour out any water from the tank and base chamber. [Figure 4.
Cleaning (cont.) 5. To descale the humidifier: a. Fill the tank with 3 US cups / 710 mL of distilled white vinegar. [Figure 4.4] c. Place the tank on the base and soak for 15–20 minutes. Vinegar will drain into the base chamber and loosen scale (mineral buildup) in the tank and in the base chamber (including the transducer and float). [Figure 4.6] Figure 4.4 Figure 4.6 b. Replace the tank cap and swish the vinegar around the tank. [Figure 4.5] Figure 4.5 d. Remove the tank and pour out any vinegar.
Cleaning (cont.) e. Flip the tank over and remove the tank cap and noise silencer. To remove the noise silencer, press the release tab and gently pull away from the humidifier. [Figure 4.8] g. Use a soft cloth and the included cleaning brush to remove scale. [Figure 4.10] Figure 4.10 Figure 4.8 f. Place the tank cap and noise silencer in a small container and fill with enough vinegar to cover them. Soak for 15–20 minutes. [Figure 4.9] h. Rinse all parts until any vinegar smell is completely gone.
Cleaning the Aroma Pad 1. Press the aroma box to release it from the base, and pull it out. [Figure 4.12] 3. Dry with a clean cloth and place it back into the aroma box. [Figure 4.14] Figure 4.12 Figure 4.14 2. Remove the aroma pad and rinse under warm, running water. [Figure 4.13] Note: Do not pour liquid cleaners or detergents into the aroma pad or box. Figure 4.
Reassembling 1. Flip the water tank over and replace the noise silencer on the tank. [Figure 4.15] 3. Store the brush in the brush storage slots in the base. [Figure 4.17] Figure 4.17 Figure 4.15 2. Refill the tank, if necessary. Replace the water tank cap by firmly twisting it back in place, aligning the arrow with the lock. [Figure 4.16] 4. Place the tank properly on the base and replace the nozzle cover onto the water tank. [Figure 4.18] Figure 4.18 Figure 4.
T R O U B L E S H O OT I N G Problem Humidifier doesn’t turn on. Possible Solution Plug in the humidifier and turn it on. Add purified or distilled water to the water tank. Turn the mist level to a higher setting. Fill the water tank. There may be too much water in the base chamber. Empty the base chamber. Refill the water tank (not the base chamber) and place the water tank properly onto the base. Little or no mist comes out. Make sure the air inlet on the bottom of the base is not blocked.
TROUBLESHOOTING (CONT.) Problem Possible Solution Make sure the water tank is properly in place (see Getting Started, page 6). Humidifier makes a loud or unusual noise. Set mist level to a lower setting. Empty the base chamber. Refill the water tank (not the base chamber) and place the water tank properly onto the base. The humidifier may be malfunctioning. Stop using the humidifier and contact Customer Support (see page 24). White dust appears around the humidifier. Water leaks from the humidifier.
V E S Y N C A P P T R O U B L E S H O OT I N G Why isn’t my humidifier connecting to the VeSync app? • Make sure your phone has Bluetooth® turned on and is not currently connected to another Bluetooth device. • During the setup process, you must be on a secure 2.4 GHz WiFi® network. Confirm that the network is working correctly. • Make sure the WiFi password you entered is correct. • Make sure your humidifier and phone are within 30 ft / 10 m of each other.
F C C S TAT E M E N T This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
WA R R A N T Y I N F O R M AT I O N Product Model Smart Ultrasonic Cool Mist Humidifier Classic 200S Date of Purchase Order ID Terms & Policy Arovast Corporation (“Arovast”) warrants this product to the original purchaser to be free from defects in material and workmanship, under normal use and conditions, for a period of one year from the date of original purchase.
C U S TO M E R S U P P O R T If you have any questions or concerns about your new product, please contact our helpful Customer Support Team. Arovast Corporation 1202 N. Miller St., Suite A Anaheim, CA 92806 Email: support@levoit.com Toll-Free: (888) 726-8520 Support Hours Mon–Fri, 9:00 am–5:00 pm PST/PDT *Please have your order invoice and order ID ready before contacting Customer Support. AT T R I B U T I O N S Apple App Store is a trademark of Apple Inc.
N OT E S 25
N OT E S 26
Connect with us @LevoitLifestyle
levoit.