Installation Guide

INSTALLATION INSTRUCTIONS

LEVEL SHELF

Place the shelf on the wall and make sure it is level.

MARK SCREW HOLES

Mark screw holes with a pencil directly above the shelf installation holes

INSTALL WALL ANCHORS

With a Phillips head screw driver screw in the wall anchors. Do not

use a wall anchor when securing into a stud.

With a Phillips head screw driver simply screw in the wall anchors. Do not

use a wall anchor when securing into a stud.

With a Phillips head screw driver simply screw in the wall anchors. Do not

use a wall anchor when securing into a stud.

24in Slimline Ledge with 4 Hooks

Item # 9602008, 9602006

For assistance with installation or missing parts, please call 1-800-860-1677

Pour recevoir de l’aide pour l’installation ou pour des pièces manquantes, composer le 1-800-860-1677

Si necesita ayuda con la instalación o le faltan piezas, por favor llame al 1-800-860-1677

CustomerService@lewishymaninc.com

This shelf system must be installed in studs for maximum stability and load capacity.

Il faut installer cette étagère dans des montants pour assurer sa stabilité et sa capacité maximale.

Este sistema de estante se debe instalar en montantes para lograr la máxima estabilidad y capacidad de carga

SECURE SHELF TO WALL

Secure mounting screws through shelf and into drywall anchors or studs.

DO NOT over tighten.

Secure mounting screws through shelf and into drywall anchors or studs.

DO NOT over tighten.

Secure mounting screws through shelf and into drywall anchors or studs.

DO NOT over tighten.

COVER SCREWS

Place plastic covers over screw ends for a clean finished look.

15 lbs

Shelf Capacity