Operation Manual

ENGLISH

PLAYBACK MODE

1. Switch on the unit. In camera mode, press the Playback mode (7) button

to enter playback mode.

2. Use the Up (8) and the Down (9) buttons to display the next or the

previous photo.

3. Press the Shutter button (5) to launch a slideshow of the photos. To stop

the slideshow, press the Up (8) or the Down (9) buttons.

4. Press the Playback mode (7) button at any time to go back to camera

mode.

Note:

• If there are no pictures stored in the camera’s built-in memory or in the SD

card, when pressing the Playback mode (7), the message “NO PICTURE”

will de displayed on screen.

• The videos cannot be played in playback mode.

Deleting one le

1. In playback mode, use the Up (8) or the Down (9) buttons to display the

desired photo or video.

2. Press the Flash/SET (4) button, the icon will appear on the LCD

display and the camera will make fast “beep” sounds. Press the Shutter

button (5) within 5 seconds to delete the photo or the video.

Deleting all les

1. In camera mode, press the Power/Menu button (6) repeatedly until the

icon is displayed on screen.

2. Press the Shutter button (5) within 5 seconds. The number of photos/

videos stored in memory starts ashing.

3. Press the Shutter button (5) again within 5 seconds to conrm the deletion

of all photos and videos. The LED ashes during the deletion.

Note: The camera automatically goes back to camera mode after a few

seconds of inactivity.

• The videos will be saved in AVI format. You can use Media player and

Quick time to play them.

• The video clips’ length may change according to the memory space

available on the camera’s built-in memory or on the SD card.

• The camera automatically goes back to camera mode after a few seconds

of inactivity.

DJ040seriesIM0119.indd 19 16/3/09 10:47:01