Safety Instructions
7
THE REAR PANEL - DIGITAL AND ANALOG
MODEL
1. POWER JACK
Standard 3-pin IEC power connector. 100-240V, 50-60Hz automatic
switching to correct voltage range.
2. DB25 6-CHANNEL DIGITAL AES I/O
This D25 connector carries six analog inputs and outputs.
3. ETHERNET INPUTS
These RJ-45 connections are used to network PCM96 Surround devices and
control them via Ethernet.
4. MIDI IN
Receives MIDI information from other MIDI equipment such as master
keyboard controllers, MIDI foot controllers, sequencers and synthesizers.
MIDI THRU
Passes any MIDI data received without change.
MIDI OUT
Transmits MIDI data to other equipment.
5. DB25 6-CHANNEL ANALOG IN/OUT
These D25 connectors each carry six analog inputs and outputs.
6. FIREWIRE
TM
PORTS
Connect FireWire
TM
cables here. Either port can be used, with the other act-
ing as Thru.
7. WORD CLOCK INPUT
This connection allows the PCM96 Surround to lock to a master system
clock. It is not terminated. For best results we recommend using âTâ con-
nectors when setting up a BNC Word Clock network and terminating the
end of of this network with a 75 ohm BNC terminator.
ANALOG I/O
1 3
7
6
54
2