Safety Instructions

THE PCM96 SURROUND PLUG-IN

The plug-in lets you add PCM96 Surround reverbs and effects to projects on

your Digital Audio Workstation (DAW).

INSTALLING THE PLUG-IN SOFTWARE

To install the PCM96 Surround plug-in:

1. Double-click the PCM96_Surround_Installer x.x.x.x.dmg file (where

“x.x.x.x.” is the version number) on the included DVD. The dmg file

opens.

2. Double-click the PCM96_Surround_Installer x.x.x.x.dmg to begin the

installer.

3. Follow the on-screen instructions to complete installation.

4. If you require RTAS support, open the PCM96_Surround_RTAS_

Installer package after installing the LexiconPro-x.x.x.x package and

rebooting.

To uninstall the plug-in software, select Uninstall from the DVD and follow

the on-screen instructions.

Minimum System Requirements

Mac

OS 10.4.9 or higher

USING THE PLUG-IN

Once you’ve created a project in your DAW and added an audio track, use

your DAW to add an insert. Navigate to the PCM96 Surround menu and

select any PCM96 Surround algorithm from the list. The PCM96 Surround

plug-in window appears.

When you first open the PCM96 Surround plug-in, its default connection

type is FireWire

. To change the connection type (and other settings) while

using the plug-in, open the PCM96 Surround Control Panel, described on

page 22.

Note that when you add a PCM96 Surround plug-in to your DAW, the

PCM96 Surround display reads “Application Lockout” and displays the

PCM96 Surround unit’s Node Name and Owner Node ID. You can change

the Node Name and Node ID with the Control Panel (see page 17 for more

information).

To exit Application Lockout, close your DAW or disconnect the cable con-

necting the PCM96 Surround to your computer.

PLUG-IN WINDOW CONTROLS

When the plug-in window first opens, it shows only a single control area.

Here you can click the up and down Program arrows to scroll through the

presets available for the selected algorithm, or click the Load button to select

from a list. Click the Load button at the bottom of the list to load the select-

ed preset, or click the Cancel button to cancel the selection.