All in One Printer User Manual

Equipment and service options Fax connection setup
Connect through an adapter used in your area See “Connecting to an adapter for your country or region”
on page 93.
Connect to a computer with a modem See “Connecting to a computer with a modem” on
page 98.
Connecting to an analog telephone line
If your telecommunications equipment uses a US-style (RJ11) telephone line, then follow these steps to connect the
equipment:
1 Connect one end of the telephone cable that came with the printer to the top LINE port
on the back of the
printer.
2 Connect the other end of the telephone cable to an active analog telephone wall jack.
Connecting to a DSL service
If you subscribe to a DSL service, then contact the DSL provider to obtain a DSL filter and telephone cord, and then
follow these steps to connect the equipment:
1 Connect one end of the telephone cable that came with the printer to the top LINE port
on the back of the
printer.
2 Connect the other end of the telephone cable to the DSL filter.
Note: Your DSL filter may look different than the one in the illustration.
3 Connect the DSL filter cable to an active telephone wall jack.
Faxing
90