Operation Manual

Using the printer wirelessly

Select the connection type that describes how you currently access your printer:

If the printer is currently set up locally (using USB connection)

Click or Start.

2 Click All Programs or Programs, and then select the printer program folder from the list.

3 Select Printer Home.

4 Click the Settings tab.

5 Click the Wireless setup utility link.

6 Follow the instructions on the computer screen to set up the printer wirelessly.

Note: There is no need to remove the USB cable connecting the printer to the computer during wireless configuration.

If the printer is currently set up for Ethernet

Unplug the Ethernet cable from the printer.

2 Place the printer close to the computer you want to use to configure the printer for wireless access.

Note: You will need to connect the printer to the computer with a USB cable. Make sure the printer is close enough

to the computer for your USB cable to reach both.

3 Click or Start.

4 Click All Programs or Programs, and then select the printer program folder from the list.

5 Select Printer Home.

6 Click the Settings tab.

7 Click the Wireless setup utility link.

8 Follow the instructions on the computer screen to set up the printer wirelessly.

Using the printer locally (USB)

Select the connection type that describes how you currently access your printer:

If the printer is currently set up for Ethernet

Attach a USB cable to the computer and to the printer.

2 Wait for a moment for Windows to locate the driver and finish setting up the printer.

3 Select the USB printer (see “Selecting the printer” on page 107).

If the printer is currently set up for wireless

Attach a USB cable to the computer and to the printer.

2 Wait a moment for Windows to locate the driver and finish setting up the printer.

3 Select the USB printer (see “Selecting the printer” on page 107).

Note: You can continue to use the printer through Ethernet or wireless connection.

Networking

106