OWNER’S MANUAL Canvas Speaker Please read the safety information carefully before using the product. OCF100 *MFL68001401* P/NO : MFL68001401 (1311-REV00) www.lg.
ACCESSORIES 2 VESA Guide Paper Installation Guide Tape 4 EA Owner's Manual Optical Cable Guide Spacer (Top) 2 EA Guide Spacer (Bottom) 2 EA Guide Spacer (Top) Fixing Screw 2 EA (M6 X L26) Guide Spacer (Bottom) Fixing Screw 2 EA (M4 X L20) Safety Clip (Top) 2 EA Safety Clip (Bottom) 2 EA Safety Clip Fixing Screw (Top/Bottom) 4 EA (M4 x 12) Protection Cushion (Upper) 2 EA (Thickness: 11 mm) Protection Cushion (Bottom) 2 EA (Thickness: 1.
SAFETY PRECAUTIONS ENGLISH - If you are a professional installer, please read this manual carefully before installing the product. - After installing the product according to the manual, ensure that the user also reads the manual carefully. After reading the manual, please keep it handy for future reference. Warning The product should be installed by a qualified professional specified by the retail store. The product should be installed where its weight can be fully supported.
Before Installation * Do not use this product for purposes other than to attach the TV to the wall. * Be careful when installing and using the wall-mounted TV to prevent product damage and safety hazards. * If the instructions in the manual are unclear, stop the installation and contact the service center. If you are still having problems understanding the instructions after contacting the service center, seek a professional to install the product for you.
2 Attaching the Protective Cushion ENGLISH -A ttach the protective cushion to minimize the impact between the TV and the canvas speaker in case they bump against each other when adjusting the angle. Attach the protective cushion to the back corners of the TV as shown in the illustration. - The thickness of upper cushion (2 EA) is 11 mm, and the bottom cushion (2 EA) is 1.5 mm. Protection Cushion (Upper), 2 EA (Thickness: 11 mm) Protection Cushion (Bottom), 2 EA (Thickness: 1.
4 Fixing the Anchors and Screws Please follow the instructions. - Check the wall material and thickness of the finish. - You can use the anchors and screws provided with the TV for walls made with concrete, lightweight concrete, soft fieldstone, hard fieldstone, brick, or cellular blocks. - Do not mount the device on walls made with plaster board or medium-density fiberboard (MDF). In this case, the anchor and screws must be inserted into the concrete behind the finish.
ENGLISH How to attach Rubber Accessories Where to attach rubber accessories → Use stiffening material when attaching the product to a wall type not specified in this manual. → Attach the two rubber accessories to the area on the bottom of the Canvas Speaker back panel as shown in the figure. CAUTION This method of attaching rubber accessories is only applicable when attaching the product to a wall not specified in this manual. yy You are advised to attach the Canvas Speaker to a concrete wall.
6 Assembling the Wall Mounting Supporter and the Canvas Speaker - Two or more people are needed to install the product. Installation Guide Tape 1. Place the Canvas Speaker on the wall mounting supporter attached to the wall in the direction of the arrows. - Attach the guide tape above the left and right holes of the wall mounting supporter and the left and right guide spacers of the Canvas Speaker. - Attach the guide tape side by side, as shown in the illustration, and then install the product.
Safety Clip (Top) Fixing screw ENGLISH Safety Clip (Top) Safety clip inserted between the wall mounting bracket and the product 3. Hang the TV with the guide spacers on the bracket wall, as illustrated with the arrow. Attach the lower part first, then attach the upper part by slightly lifting up the TV. 4.
7 10 Adjusting the Level of the Product If the product is not level after the installation, adjust it using the screw. (The product goes up or down according to the rotation direction of the screw.
8 Organizing the Power Cord ENGLISH After pulling the canvas speaker forward and draw out the power cord through the square hole below the canvas speaker to organize it.
ew, 9 Fix the Safety Clip (Bottom) - Be sure to fix the safety clip (bottom) after organizing the power cord. Fix the safety clip (bottom), using the safety clip fixing screw, into the wall mounting bracket square hole as shown in the illustration. - Fix the clip to make it bilaterally symmetrical. - Make sure that the product is fixed securely by lightly pulling on the upper part of the Canvas Speaker. - Pull out the lower part of the canvas speaker to check if the product is securely fixed.
ENGLISH 11 Assembled Appearance of the Canvas Speaker and the TV Canvas Speaker TV CAUTION Do not place the TV near or on yy sources of heat, as this may result in fire or other damage. Leave a 10 cm (4 inches) (minimum) yy space from the wall for proper ventilation.
SPECIFICATIONS ° ~ ° ± ° [Unit: mm] Wall Mounting bracket ° ~ ° ± ° ° ~ ° ± ° Max. ° ~ ° ± ° Min.
ENGLISH Canvas Speaker Wall Mounting Supporter Model Name Width Height Depth Canvas Speaker Wall Mounting bracket 1430 (mm) 450 (mm) Wall Mounting Supporter 500 (mm) 56.2 (inches) 17.7 (inches) 19.6 (inches) 865 (mm) 500 (mm) 64 (mm) 34.0 (inches) 19.6 (inches) 2.5 (inches) 64 (mm) 40 (mm) 9 (mm) 2.5 (inches) 1.5 (inches) 0.3 (inches) 17.7 (kg) 5.7 (kg) 0.6 (kg) 39.0 (lbs) 12.5 (lbs) 1.3 (lbs) - 210 (Top) / 364 (Bottom) * 450 - Max.
The model name and serial number are located on the back and a side of the product. Please make a note of these below.