OWNER’S MANUAL Magic Remote Please read this manual carefully before operating your set and retain it for future reference. AN-MR400 Remote control (AN-MR400G) RF Dongle (AN-MR400D) www.lg.com (Brazil : www.lge.
ACCESSORIES ENERGY AV MODE INPUT TV SAVING 1 2 4 5 7 8 9 0 FLASHBK LIST EDFN 3 6 VPDUW MARK FAV VOL CH 3D P A G E MUTE MENU INFO Q.MENU /Q.MENU ENTER YRO FK BACK EXIT L/R SELECT FREEZE REV.5 RATIO Magic Remote Control and Alkaline Batteries (AA) (Depending on country) Owner’s Manual RF Dongle RF Dongle Cable Velcro REMOTE DESCRIPTION Wheel (OK) EDFN POWER VPDUW Selects menus or options and confirms your input. Scrolls through the saved channels.
RF DONGLE Cable IN RF SPECIFICATION The Magic Remote Control communicates with the RF Dongle using Bluetooth Version 3.0 . REV.5 Lamp INSTALLING THE RF DONGLE Image shown may differ from your TV. 86% 1 Locate the designated Velcro attachment location on the TV. Then tear off the protection paper and attach the Velcro. (The attachment location is different depending on the TV model you own) 2 Connect the RF Dongle Cable plug on the RF Dongle to a USB or USB Apps jack on the TV.
REGISTERING HOW TO USE To use the Magic Remote Control, pair it with your TV first. How to register the Magic Remote Control 1P ut batteries into the Magic Remote Control and turn the TV on. 2 Point the Magic Remote Control at your TV and press the WHEEL (OK) on the remote control. * If the TV fails to register the Magic Remote Control, try again after turning the TV off and back on.
