User guide

English

Installation

Powering Off the Projector

1. Press the “POWER ” to turn off the projector, you will see

a message as below on the on-screen display.

2. Press the “POWER ” again to conrm.

3. The cooling fan continues to operate for cooling cycle and

the POWER LED will ash orange. When the POWER LED

is orange, the projector has entered standby mode.

If you wish to turn the projector back on, you must wait

until the projector has completed the cooling cycle and has

enter standby mode.

Once in standby mode, simply press “POWER ” to restart

the projector.

4. Disconnect the power cable from the electrical outlet and the

projector.

5. Do not turn on the projector immediately following a power

off procedure.