Cycles Guide

30
Type Cycle Fabric Type Dry Level Temperature
Time
in Min.
More
Time/
Less
Time
Wrinkle
Care
Damp
Dry
Signal
Energy
Saver
SENSOR
DRY
Heavy Duty
Jeans,
heavyweight items
Normal Dry
High 54
 
Adjustable
Normal
Work clothes,
corduroys, etc.
Normal Dry
Medium
Elec. : 67
Gas : 63
  
Adjustable
Delicates
Lingerie, sheets,
blouses
Normal Dry
Low 28
 
Adjustable
Perm.Press
Permanent press,
synthetic items
Normal Dry
Low 32
 
Adjustable
Anti
Bacterial
Do not use this cycle
with delicate fabrics.
Very
Dry
High 70

MANUAL
DRY
Speed Dry
For small loads with
short drying times
Off
High 25
 
Adjustable Adjustable
Air Dry
For items that require
heat-free drying such
as plastics or rubber
Off No Heat
30
 
Adjustable
Cycle Guide
= default setting

= allowable option
Sensor dry cycles
Sensor dry cycles utilize LG’s unique dual sensor
system to detect and compare the moisture level
in clothes and in the air and adjust the drying time
as needed to ensure superior results. The dryer
automatically sets the dryness level and temperature
at the recommended setting for each cycle. The
estimated time remaining will be shown in the display.
Manual dry cycles
Use manual dry cycles to select a specific amount of
drying time and a drying temperature. When a manual
dry cycle is selected, the ESTIMATED TIME REMAINING
display shows the actual time remaining in your cycle.
You can change the actual time in the cycle by
pressing More Time or Less Time.
CERTIFIED BY NSF/P154
NSF International (formerly the National Sanitation
Foundation), certifies that the Anti Bacterial cycle
reduces 99.9% of bacteria on laundry, and none of the
bacteria will carry over onto the next laundry load.
• The default settings for the Anti Bacterial cycle are
High temperature and Very Dry.
These default settings cannot be changed.
• Do NOT use this cycle with delicate items or fabrics.
NOTE
To protect your garments not every dryness level,
temperature, or option is available with every cycle.
See the Cycle Guide for details.
HOW TO uSE
NOTE
The Energy Saver option is turned on by default in the
Normal Cycle.
If you want faster drying than the Normal default
setting, you can turn off the Energy Saver option.
MFL67731056_en_150715.indd 30 2015.7.15 3:39:2 PM