Use and Care Manual

ManualsBrandsLG Electronics ManualsHousehold Appliance7.3 cu. ft. Electric Front Control Dryer in White

ENGLISH

HOW TO USE

Operating the Dryer

Turn On the Dryer

Press the POWER button to turn on the dryer. The cycle LEDs will illuminate

and a signal will sound, if turned on. Refer to page 10.

Begin the cycle

Press the START/PAUSE button to begin the cycle. The cycle can be paused at

any time either by opening the door or by pressing the START/PAUSE button. If

the cycle is not restarted within 4 minutes, the dryer will shut off and the cycle

settings will be lost.

Select a Cycle

Press the Cycle buttons until the indicator for the desired cycle is lit.

The preset temperature, dry level, and option settings for that cycle will be

shown. Default settings for the selected cycle can now be changed if desired.

Refer to the Cycle Setting and Options page for details.

End of Cycle

When the cycle is finished, the chime will sound if it is set. Remove your

clothing from the dryer immediately to reduce wrinkling. If Wrinkle Care is

selected, the dryer will tumble briefly every few minutes to help prevent

wrinkles from setting in the clothes.

Clean the Lint Filter

If the lint filter has not already been cleaned, lift out the filter and remove the

lint from the last load. This will help ensure the fastest and most efficient drying

performance.

Load the Dryer

Load the dryer with the wet laundry from the washer. If the load is extra large,

you may need to divide it into smaller loads for proper performance and fabric

care.

Lint

Filter

NOTE

Not all options or modifiers are available on all cycles. Refer to the Cycle

Guide page for default settings and allowable options. A different chime will

sound and the LED will not come on if the selection is not allowed.

NOTE

Do not place items on the top of the dryer.

HOW TO USE

MFL67731056_en_150715.indd 29 2015.7.15 3:39:1 PM

Summary of content (12 pages)

PAGE 1
HOW TO USE 29 How to use ENGLISH Operating the Dryer Clean the Lint Filter 1 Lint Filter If the lint filter has not already been cleaned, lift out the filter and remove the lint from the last load. This will help ensure the fastest and most efficient drying performance. Load the Dryer 2 Load the dryer with the wet laundry from the washer. If the load is extra large, you may need to divide it into smaller loads for proper performance and fabric care.
PAGE 2
30 HOW TO USE Cycle Guide = default setting  Type Cycle Fabric Type Jeans, Heavy Duty heavyweight items SENSOR DRY MANUAL DRY Dry Level Temperature inTime Min. Normal Dry Adjustable Normal Work clothes, corduroys, etc. Normal Dry Delicates Lingerie, sheets, blouses Normal Dry Perm.Press Permanent press, synthetic items Normal Dry Anti Bacterial Do not use this cycle with delicate fabrics.
PAGE 3
HOW TO USE 31 Following are instructions for starting and using your new dryer. Please refer to specific sections of this manual for more detailed information. Check the Lint Filter Before Every Load Fabric care labels Most articles of clothing feature fabric care labels that include instructions for proper care. Dry Dry Gentle/ Gentle/ delicate delicate Heat setting Always make sure the lint filter is clean before starting a new load; a clogged lint filter will increase drying times.
PAGE 4
32 HOW TO USE Cycle Settings And Options Sensor dry cycles have preset settings that are selected automatically. Manual dry cycles have default settings, but you may also customize the settings using the cycle setting buttons. Press the button for that option to view and select other settings. NOTE To protect your garments, not every dryness level, temperature, or option is available with every cycle. See the Cycle Guide for details. Dry Level Selects the level of dryness for the cycle.
PAGE 5
HOW TO USE 33 Custom Program Damp Dry Signal With this option, the dryer will signal when the load is approximately 80% dry. This allows you to remove faster- drying lightweight items or items that you would like to iron or hang while still slightly damp. Press the Damp Dry Signal button to activate or deactivate Damp Dry Signal. If you have a special combination of settings that you use frequently, you can save these settings as a Custom Program..
PAGE 6
34 How to use Tag on - The Tag On function allows you to conveniently use the LG Smart Diagnosis™ , Cycle Download, Laundry Stats and Tag On Cycle Set features to communicate with your appliance right from your own smart phone. To use the Tag On functions: 1. Download the LG Smart Laundry&DW App to your smart phone. 2. Turn on the NFC (Near Field Communication) function in your smart phone.
PAGE 7
How to use 35 Using Tag On with Applications Tag On Diagnosis 1. Install the LG Smart Laundry & DW application on a NFC-equipped smartphone. - Install the application from the Play store and run it. ENGLISH Touch the LG appliance’s Tag On logo with your NFCequipped smart phone to use the LG Smart Laundry&DW applications: LG Smart Diagnosis, Cycle Download, Laundry Stats, and Tag on Cycle Set. 4. Touch the Tag On logo.
PAGE 8
36 How to use Call Center If you receive a diagnosis from either the Tag On Diagnosis or Smart Diagnosis application that is unclear or directs you to call the LG Service Center, follow these instructions: 1. Select Press to Call LG Service on the Smart Diagnosis™ Result screen. 2. Select your country. 3. Agree to Terms and Conditions of the Use and Privacy Policy selecting I Accept. 4. Enter your phone number in the field.
PAGE 9
How to use 37 Tag On Cycles Download 2. Select Tag On. - Select Tag On by using the top icons or the bottom icons. 3. Select Tag On Cycle Download. ENGLISH Tag On Cycle Download allows you to download cycles for later use. The cycle is available at the Downloaded cycle position on the control panel until another cycle is downloaded. 1. Install the LG Smart Laundry&DW application on a NFC-equipped smartphone. - Install the application from the Play store and run it. 5 Select a cycle to download.
PAGE 10
38 How to use Laundry Stats Laundry Stats can monitor the Flow Sense result in case your home exhaust system is clogged. Laundry Stats can also tell you details of your last ten cycles. 1. Select Tag On by using the top icons or the bottom icons. FLOW SENSETM Status LG’s Flow SenseTM duct blockage sensing system detects and alerts you to restrictions in the installed household ductwork that reduce exhaust airflow through the dryer. 1. Select the FLOW SENSETM Status in the Laundry Stats screen. 2.
PAGE 11
How to use 39 Run Cycle Again ENGLISH 1. Select the Run Cycle Again button. - The most used cycle or most recent cycle can be immediately started by selecting the Run Cycle Again button. 3. Check whether drying starts with the selected cycle. - The screen shown at right appears and drying starts immediately on the selected cycle. 2. Touch the Tag On logo. - When a Tag On screen appears(shown at right), tap your smart phone on the Tag On icon on the right side of the dryer’s control panel.
PAGE 12
40 How to use Tag On Cycle Set Tag On Cycle Set allows you to automatically adjust the cycle and settings based on your needs. 1. Select Tag On by using the top icons or the bottom icons. 2. Select Tag On Cycle Set. 3. Touch the Tag On logo. - When a Tag On screen appears(shown at right), tap your smart phone on the Tag On icon on the right side of the dryer’s control panel.