Instructions / Assembly

ManualsBrandsLG Electronics ManualsAppliances7.4 cu. ft. Electric Dryer with True Steam in White

OPERATION

Operating the Dryer



Press the ON/OFF button to turn on the dryer. The cycle LEDs illuminate and a

signal sounds, if turned on. Refer to page 10.



Press the START/PAUSE button to begin the cycle. The cycle can be paused at

any time either by opening the door or by pressing the START/PAUSE button. If

the cycle is not restarted within 60 minutes, the dryer will shut off and the cycle

settings will be lost.



Turn the cycle selector knob in either direction until the LED for the desired

cycle is on. The preset temperature, dry level, and option settings for that cycle

will be shown. Refer to page 33. Default settings for the selected cycle can now

be changed if desired. This can be done using the cycle modifier buttons as

shown on page 35. Cycle options can be added using the option buttons as

shown on page 35-38.

NOTE

Not all options or modifiers are available on all cycles. A different chime will

sound and the LED will not come on if the selection is not allowed.



Load the dryer with the wet laundry from the washer. If the load is extra large,

you may need to divide it into smaller loads for proper performance and fabric

care.



If the lint filter has not already been cleaned, lift out the filter and remove the

lint from the last load. This will help ensure the fastest and most efficient drying

performance.

OPErATION



When the cycle is finished, the chime will sound if it is set. Remove your

clothing from the dryer immediately to reduce wrinkling. If WRINKLE CARE

is selected, the dryer will tumble briefly every few minutes to help prevent

wrinkles from setting in the clothes.

Lint Filter

MFL67731085_en_160809.indd 32 2016.8.9 5:41:49 PM

Summary of content (9 pages)

PAGE 1
32 OPERATION OPERATION Operating the Dryer CLEAN THE LINT FILTER 1 Lint Filter 2 If the lint filter has not already been cleaned, lift out the filter and remove the lint from the last load. This will help ensure the fastest and most efficient drying performance. LOAD THE DRYER Load the dryer with the wet laundry from the washer. If the load is extra large, you may need to divide it into smaller loads for proper performance and fabric care.
PAGE 2
OPERATION = default setting Cycle Guide Fabric Type = allowable option Dry Level Comforters, shirts, Trousers (except Off Especially delicate Fabrics) Steam Comforters, bedding, Off SanitaryTM Children’s clothing Anti Do not use this cycle Very Bacterial With delicate fabrics. Normal Comforters, pillows, Bulky/Large Shirts Adjustable Normal Permanent press, Perm. Press Synthetic items Adjustable Normal Cotton/ Work clothes, Normal Corduroys, etc.
PAGE 3
4 OPERATION Sorting Loads Check the Lint Filter before Every Load Fabric care labels Most articles of clothing feature fabric care labels that include instructions for proper care. To clean, pull the lint filter straight up and roll any lint off the filter with your fingers. Do not rinse or wash the filter to remove lint. Push the lint filter firmly back into place. See Regular Cleaning for more information.
PAGE 4
OPERATION 35 Cycle Modifier Buttons NOTE To protect your garments, not every dryness level, temperature, or option is available with every cycle. See the Cycle Guide for details. DRY LEVEL Selects the level of dryness for the cycle. Press the DRY LEVEL button repeatedly to scroll through available settings. • This option is only available with SENSOR DRY cycles. • The dryer will automatically adjust the cycle time.
PAGE 5
36 OPERATION Special Functions The option buttons also activate special functions, including CHILD LOCK. Select the option by pressing the option button. Press and hold the option button to select special features marked with the asterisk (*), such as Child Lock. * CHILD LOCK Use this option to prevent unwanted use of the dryer or to keep cycle settings from being changed while the dryer is operating. Press and hold the button for 3 seconds to activate or deactivate the CHILD LOCK function.
PAGE 6
OPERATION 37 Custom Program To Save a Custom Program: 1. Turn on the dryer and turn the cycle selector knob to select the desired cycle. 2. Use the cycle modifier buttons to adjust the settings for that cycle. 3. Press the cycle option button(s) for the option you would like to add. A confirmation message will be shown in the display. 4. Press and hold the PGM Save button for 3 seconds. NOTE You may save only one custom program at a time.
PAGE 7
38 OPERATION Steam Functions (cont.) NOTE wWarning • Do not open the dryer door during steam cycles. Failure to follow this warning can cause serious injury or death. • Do not touch the steam nozzle in the drum during or after the steam cycle. Failure to follow this warning can cause serious injury or death. • Steam may not be clearly visible during the steam cycles. This is normal.
PAGE 8
SMART FUNCTIONS 39 SMART FUNCTIONS Conveniently use the smart features to communicate with the appliance right from a smart phone. The Tag On function can only be used with most smart phones equipped with the NFC (Near Field Communication) function and based on the Android OS (operating system). Installation of the Application Search for the LG Smart Laundry&DW application from the Google Play Store on a smart phone.
PAGE 9
40 SMART FUNCTIONS Using Smart DiagnosisTM Should you experience any problems with your dryer, it has the capability of transmitting data to your Smart Phone using the LG Smart Laundry Application or via your telephone to the LG call center. Smart Diagnosis™ cannot be activated unless your dryer is turned on by pressing the ON/OFF button. If your dryer is unable to turn on, then troubleshooting must be done without using Smart Diagnosis™.