Owners manual

Note
Reversing the doors is not covered by the warranty.
33
24
33
33
25
34
19
27
28
29
23
26
30
31
32
26
29
18
10
9
17
5
6
11
3
2
3
2
23
23
23
24
2
5
2
6
4. Destroy the two small caps on the front of the cover front
with a screw driver, then separate the screw and . Separate
the cover front . Move the wire to left, install the cover
front and the screw. Take the small caps out of the alternate
bag, then install the small caps.
28
28
27
27
19
5. Remove the small cap of the refrigerator door , then
separate the small cap . Move the cable 29 from left to the
corresponding position on the right. Install the small cap ,
then install the small cap on the corresponding position on
the right.
9 11
18
34
30
26 29
31
32
6
6. Install the hinge lower and the freezer door , then install
the hinge middle . Separate the cap on the freezer. Install
the freezer door, take the hinge upper out of the alternat
e
bag and install it on upper left. Pull out the wire from th
e
individual holes and connect these cables. Take the small caps
out of the alternate bag, then install the small caps. Install
base cover
.
7. Separate the cap on the right side of the door, then install it
into the left screw hole (you can see this hole after the left handle
is removed). Install the handle and the screw which previously
separated on the corresponding position on the right. (The
hidden handle does not need this procedure) Then Installatio
n
completed
.
19