User manual

It is important that your refrigerator be kept clean to
prevent undesirable odors. Spilled food should be
wiped up immediately, since it may acidify and
stain plastic surfaces if allowed to settle.
Never use metallic scouring pads, brushes, coarse
abrasive cleaners or strong alkaline solutions on
any surface.
Before you clean, however, remember that damp
objects will stick or adhere to extremely cold
surfaces. Do not touch frozen surfaces with wet or
damp hands.
EXTERIOR - Use a lukewarm solution of mild soap
or detergent to clean the durable finish of your
refrigerator. Wipe with a clean, damp cloth and
then dry.
INTERIOR - Regular cleaning of the interior and
interior parts is recommended. If you have the No
Frost Model which defrosts automatically, leave
both doors open during the entire cleaning process.
Disconnect the power supply, and remove food and
all Compartment Shelves, Storage Trays etc. Wash
all compartments with a baking soda solution. Rinse
and dry.
.
INTERIOR PARTS - Wash compartment shelves,
door shelves, storage trays and magnetic door seals
etc. with a baking soda solution or a mild detergent
and warm water. Rinse and dry.
WARNING
Always remove power cord from the wall
outlet prior to cleaning in the vicinity of
electrical parts (lamps, switches, controls,
etc.). Wipe up excess moisture with a
sponge or cloth to prevent water or liquid
from getting into any electrical part and
causing a electric short circuit. Do not use
flammable or toxic cleaning liquids.
GENERAL INFORMATION
VACATION TIME
During average length vacations, you will probably
find it best to leave the refrigerator in operation
with REFRIGERATOR TEMP. CONTROL at "MIN"
Position.
Place freezable items in freezer for longer life.
When you plan to be away for an extended period,
remove all food, disconnect the power cord, clean
the interior thoroughly, and don't leave door OPEN.
POWER FAILURE
Most power failures are corrected in an hour or two
and will not affect your refrigerator temperatures.
However, you should minimize the number of door
openings while the power is off. During power
failures of longer duration, place a block of dry ice
on top of your frozen packages.
IF YOU MOVE
Remove or securely fasten down all loose items
inside the refrigerator.
To avoid damaging the leveling screws, turn them
all the way into the base.
ANTI-CONDENSATION PIPE
The outside wall of the
refrigerator cabinet
will always be
warm,
especially just after
installation. Don't be
alarmed. This is due to
the anti-condensation
pipe, which pumps hot
refrigerant to prevent
"sweating" on the outer
cabinet wall.
Anti-Condensation
Pipe
CLEANING
11