Owners manual

Operation
13
13
EXPRESS COOL
< Exterior Type >
• Please select this function for prompt cooling.
• Press the Express Cool button once, and then the
quick cooling operation starts with the lamp on.
• The Express Cool operation takes about 12 hours.
When its operation ends, it automatically returns
to the previous temperature setting. If you want
to stop the quick cooling operation, press the
Express Cool button once more, the lamp goes
out, and the Express Cool operation stops and the
refrigerator returns to the previous temperature
setting.
Eco Friendly
< Exterior Type >
• This function makes the fridge work in a power
saving mode which is useful for when you are
away on holiday, by reducing energy
consumption.
Pressing ‘ECO FRIENDLY’ starts operation with
lamp on and pressing it again stops the
operation.
Self Test
• This function automatically detects failure when
failure is found in product during the use of
Fridge.
• If the failure occurs at product and it does not
operate by pressing any button and normal
indication is not done, do not turn the power off
and immediately contact with the local service
center.
• A lot of time is needed for service engineer to
detect the failed part by turning it off.
How to adjust the temperature in the
Fridge compartment
< Exterior Type >
• The initial temperature of the Fridge Compartment
is 3°C.
You can now adjust the temperature of the
Compartment as you want.
By pressing the button, it is possible to change the
temperature.
Note
The actual inner temperature varies depending
on the food status, as the indicated setting
temperature is a target temperature, not actual
temperature within Fridge.
Refrigeration function is weak in the initial time.
Please adjust temperature as above after using
Fridge for minimum 2~3 days.
Note
When the Eco Friendly mode is “ON”, the other
buttons will not operate. When you come back
from Eco Friendly, press the Eco Friendly mode
off so that other buttons work and the Fridge
returns to previous temperature setting.