REFRIGERATOR OWNER'S MANUAL Please read this manual carefully and thoroughly before operating this unit. RÉFRIGÉRATEUR MANUEL D’UTILISATION VEUILLEZ LIRE CE MANUEL AVECATTENTION AVANT D’UTILISER L’APPAREIL FRIGORIFICO MANUAL DO UTILIZADOR Por favor leia atentamente este manual antes de ligar este electrodoméstico P/No.
FEATURE CHART .................................... 4 OPERATION .............................................. 6 Starting Temperature Control Ice Making Door Cooling Fresh Zone Defrosting Deodorizer (option) F. I. R. Lamp (option) LAMP REPLACEMENT ............................ 7 SUGGESTIONS ON FOOD STORAGE .... 8 CLEANING ................................................ 9 GENERAL INFORMATION ....................... 9 IMPORTANT WARNINGS ......................... 10 BEFORE CALLING FOR SERVICE ..
THIS REFRIGERATOR IS MANUFACTURED WITH GREAT CARE, AND UTILIZES THE LATEST IN TECHNOLOGY. WE ARE CONFIDENT THAT YOU WILL BE FULLY SATISFIED WITH IT'S PERFORMANCE AND RELIABILITY. BEFORE YOU START YOUR REFRIGERATOR, PLEASE READ THIS BOOKLET CAREFULLY. IT PROVIDES EXACT INSTRUCTIONS FOR INSTALLATION, OPERATION AND MAINTENANCE, AND ALSO SUPPLIES SOME USEFUL HINTS. INSTALLATION NEXT 1. Select a good location. Place your refrigerator where it is easy to use. 1.
FEATURE CHART FREEZER COMPARTMENT Freezer Temperature Control Knob Twist Ice Trays/Normal Freezer Shelf (Crystal or Steel) Freezer Door Basket Small (Optional) Egg Storage Shelf Twist "N" Serve(Optional) Freezer door Basket (Steel/Crystal) Moisture Controller Maintains humidity inside tray vegetable for lasting freshness of vegetable and fruits.
FEATURE CHART FREEZER COMPARTMENT Freezer Temperature Control Knob Multi Utility Basket Twist Ice Trays/Normal Freezer Shelf (Crystal or Steel) Egg Storage Shelf Twist "N" Serve(Optional) Freezer door Basket (Steel/Crystal) Moisture Controller Maintains humidity inside tray vegetable for lasting freshness of vegetable and fruits.
Operation Starting When your refrigerator is first installed, allow it 24 hours to stabilize at normal operating temperatures prior to filling it with fresh or frozen foods. Then adjust the knobs to get satisfactory results as per instruction given below. If operation is interrupted, allow 5 minutes delay before restarting. 1. Temperature Control r Refrigerator Med Med Max Min FREEZER TEMP. CONTROL FRIDGE MAX. NORMAL. 7 FREEZER MAX.
Twist 'N' Serve Type l To make ice cubes, fill the ice tray with water and insert in its position. l l To remove ice cubes, hold the knob of the tray and turn gently. Then, ice cubes drop in the Bank Ice. Ice Trays Bank Ice In case of a steel shelf To place a shelf at a higher position, remo ve the ice cube box, and place the shelf, and then replace the ice cube box. Instruction for Bank Ice Use Bank Ice Only To Store Ice Cubes. Do Not Make Ice In It, As It May Break. 3.
Lamp Replacement 1. Unplug the power cord from the outlet. 2. Remove refrigerator shelves. 3. To remove the lamp cover, insert a slotted driver at the one of under hole of the lamp cover and pull it out forwards. 4. Turn the lamp counterclockwise. 5. Assemble in reverse order of disassembly. Replacement bulb must be the same specification as original CAUTION l l If you want to check the F.I.R Lamp operation, don't touch F.I.R Lamp because you may burn your fingers with the high temperature of its surface.
Cleaning It is important that your refrigerator be kept clean to prevent undesirable odors. Spilled food should be wiped up immediately since it may acidify and stain plastic surfaces if allowed to settle. Never use metallic scouring pads, brushes, coarse abrasive cleaners or strong alkaline solutions on any surface. Before you clean, however, remember that damp objects will stick or adhere to extremely cold surfaces. Do not touch frozen surfaces with wet or damp hands.
I M P O R T A N T W A R N I N G Do Not Use An Extension Cord About Grounding(earthing) If possible, connect the refrigerator to its own individual electrical outlet to prevent it and other appliances or household lights from causing an overload and intermittent tripping . In the event of an electric short circuit, grounding (earthing) reduces the risk of electric shock by providing an escape wire for the electric current. In order to prevent possible electric shock, this appliance must be grounded.