User manual

9
Vacation Time
During average length vacations, you will
probably find it best to leave the
refrigerator in operation with
Refrigerator Temp. Control at "Min"
Position.
Place freezable items in freezer for
longer life. When you plan to be away for
an extended period, remove all food,
disconnect the power cord, clean
the interior thoroughly, and don't leave
door OPEN.
Power Failure
Most power failures are corrected in an
hour or two and will not affect your
refrigerator temperatures. However, you
should minimize the number of door
openings while the power is off. During
power failures of longer duration, place a block of dry
ice on top of your frozen packages.
If you Move
Remove or securely fasten down all loose item inside
the refrigerator. To avoid damaging the leveling screws,
turn them all the way into the base.
Anti-condensation Pipe
The outside wall of the
refrigerator cabinet
will always be warm,
especially just after
installation. Don't be
alarmed. This is due to
the anti-condensation
pipe, which pumps hot
refrigerant to prevent
"sweating" on the outer
cabinet wall.
It is important that your refrigerator be kept clean to
prevent undesirable odors. Spilled food should be
wiped up immediately since it may acidify and stain
plastic surfaces if allowed to settle. Never use metallic
scouring pads, brushes, coarse abrasive cleaners or
strong alkaline solutions on any surface.
Before you clean, however, remember that damp
objects will stick or adhere to extremely cold surfaces.
Do not touch frozen surfaces with wet or damp hands.
Exterior - Use a lukewarm solution of mild soap or
detergent to clean the durable finish of your
refrigerator. Wipe with a clean, damp cloth and then
dry.
Interior - Regular cleaning of the interior and interior
parts is recommended. If you have the No Frost Model
which defrosts automatically, leave both doors open
during the entire cleaning process. Disconnect the
power supply, and remove food and all Compartment
Shelves, Storage Trays etc. Wash all compartments
with a baking soda solution. Rinse and dry.
Interior Parts - Wash compartment
shelves,door shelves, storage trays and
magnetic door seals etc. with a baking
soda solution or a mild detergent and warm
water. Rinse and dry.
WARNING
Always remove power cord from the wall
outlet prior to cleaning in the vicinity of
electrical parts (lamps, switches, controls,
etc.). Wipe up excess moisture with a
sponge or cloth to prevent water or liquid
from getting into any electrical part and
causing a electric short circuit. Do not use
flammable or toxic cleaning liquids.
General Information
Cleaning
Anti-Condensation
Pipe