User manual

Operation
27
1.
After turning the HANDLE Tank backward with the
WATER TANK installed at the DOOR, Open the COVER
BUCKET and then fill water using a kettle etc.
* Fill water while watching a sight glass on the front of
the WATER TANK.
* Water up to 3
l
can be filled.
2.
Press and fix the COVER BUCKET.
3.
After filling spring water, fix the HANDLE TANK at a
proper position.
1.
Insert the valve assembly into the cover of a PET
bottle. (Height of PET ; Below 310MM)
2.
Assemble the PET bottle on
the door.
3.
Make a hole for air-inflow
on the top of the PET bottle.
Filling of
WATER TANK
Filling of
PET Bottle
When integrating the valve assembly, please proceed it
after checking if the rubber packing inside is correctly
assembled or not.
ww
Caution
OX X